for iPhone 5 LCD Display Touch Screen Full Assembly Replacement with Home Button Front Camera Ear Speaker Repair Tools and Tempered Glass, Black;

Product Specifications:

Color:Black

Size:4.0 inches

Display: LED-back lit IPS LCD touch screen, 16M colors

Resolution: 1136 x 640 pixels, 326 ppi pixel density

Front camera: 120 Megapixel

Home Button

Front Camera

Ear Speaker

Metal Back Plate

Installation Tips:

1.Check screen appearance to confirm there is no damage.

2.Before DIY, watch videos on how to replace iPhone 5 screen, there are step by step guidelines.

3.Connect the cables to mother board and test replacement screen functions.

4.Screws have different size and length, do not mix them up. Assemble them to the wrong position will damage the screen.

5.Connection cables are fragile, over bend or twist will cause malfunction to the screen.

6.Do not pry the cable sockets on the motherboard when disconnect them, it will damage the sockets and the screen will not work.

7.Match screen into right position of the rear case, and press with general force from top to bottom.Do not push too hard to crack the screen.

Problems may occur after installation:

Screen could not turn on, touch with no response, flashing screen, lines on screen etc.

1.Make sure the flex cables are well connected and there are no debris on the connectors.

2.Disconnect and reconnect the flex cables(including the battery cable).

3.Reboot: Hold Home Button, Up Volume, and Power Button until your iPhone power off and then power on.

4.Clean the screen surface with alcohol to eliminate static after installation.