Pi Panel Mount Pluggable Terminal Block Breakout Module - for Raspberry Pi.
If you want to build a Raspberry Pi project with outer case, and need external wiring, this will be a good choice.
The item has been soldered and assembled.
Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper.
2x20pins IDC connector, pitch 2.54mm/0.1".
FR-4 fiber glass PCB, dual copper layers, pads grid pitch 2.54mm/0.1", hole diameter 0.8mm.
NOTE: the item not include Raspberry Pi and flat ribbon cable.
Datasheet: http://www.audiowind.com/new-pdf/d-1143.pdf
　
- Pi Panel Mount Pluggable Terminal Block Breakout Module - for Raspberry Pi.
- The item has been soldered and assembled.
- Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper.
- 2x20pins IDC connector, pitch 2.54mm/0.1".
- FR-4 fiber glass PCB, dual copper layers, pads grid pitch 2.54mm/0.1", hole diameter 0.8mm.
- Pi Panel Mount Pluggable Terminal Block Breakout Module - for Raspberry Pi.
- The item has been soldered and assembled.
- Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper.
- 2x20pins IDC connector, pitch 2.54mm/0.1".
- FR-4 fiber glass PCB, dual copper layers, pads grid pitch 2.54mm/0.1", hole diameter 0.8mm.
