It belongs to UY type wire conductors butt splice, which changed complicated traditional cable wire twist and soldering connection method.
Insert two conductors separately into two ports without stripping conductors insulation; Crimp or squeeze the yellow button onto the inside two conductors with a pliers (here is not included.); Now you finished it!
Gel-filled inside design promises an air-tight environment for conductors.
Good quality and exquisitely design offer corrosion-resistant function to protect the connection against air and moisture.
- K3 connector is single damp-proof type, using double pole connection, used for "Y" type three-wire multiple connection.
- It belongs to UR type wire conductors butt splice, applied to the conductors with inner diameter of 0.4—0.9mm.
- 3 Ports UR Connectors is suitable for quick connection of medium and small power lines.
- It can solves the problem of cumbersome operation of screw - type terminal connection.
- Installation: insert three wire ends into the wiring hole, and then press the connector protruding cap downward with a pliers until the two wires are pressed tight.(pliers is not included).
- K3 connector is single damp-proof type, using double pole connection, used for "Y" type three-wire multiple connection.
- It belongs to UR type wire conductors butt splice, applied to the conductors with inner diameter of 0.4—0.9mm.
- 3 Ports UR Connectors is suitable for quick connection of medium and small power lines.
- It can solves the problem of cumbersome operation of screw - type terminal connection.
- Installation: insert three wire ends into the wiring hole, and then press the connector protruding cap downward with a pliers until the two wires are pressed tight.(pliers is not included).
