ENERLITES 7 Days Digital In-Wall Programmable Timer Switch for Lights, fans, and Motors, Neutral Wire Required,7-Day 18 ON/OFF Timer Settings, With Blue Backlight, UL Listed, HET01, 2 Pack

TOPGREENER TSOS5-W Passive Infrared In-Wall Motion Sensor Light Switch, you can enjoy great savings and convenience with lighting control. When you put the slide switch button to AUTO mode, TSOS5 PIR motion sensor will detect motion and turn on load such as a lights, fans, motors, or heaters automatically; and turn off the load when no motion is sensed for preset delay time. Variable delay time between 15 seconds, 10 minutes, 20 minutes and 30 minutes.

Passive Infrared, PIR sensor detect occupancy by sensing the difference between heat emitted from the human body in motion and background space. This occupancy sensor has a maximum coverage area up to 707 sq. ft., 180-degree field of view; sensitivity level is adjustable in 4 positions from 30% to 100%. To provide adequate coverage with-in a space, motion activated sensors utilize a unique Fresnel lens which divides the coverage area into zones, thus enhancing the detection of small movement.

With Top Greener's TSOS5 in-wall motion sensor light switch, you will enjoy the energy efficient benefits and avoid energy waste by preventing lights to turn on in the day time even when motion is detected.
Use the TSOS5 as occupancy motion detector sensor, or set it to be in manual OFF or ON mode just like your standard ON/OFF.This operation can be done easily by sliding the sliding switch on the front of the motion sensor. TOPGREENER's TSOS5 motion sensor light switch is perfect for areas like your hallway, stairway, closet, bathroom garage, and more!

Specifications:

CFL/LED: 150-Watt @ 120 VAC
Incandescent/Halogen: 500-Watt @ 120 VAC
Fluorescent: 500-Volt Amp @ 120 VAC
Motor: 1/8HP @ 120 VAC
Coverage: 180 degrees, 707 square feet
Single-Pole use only
Neutral wire required

𝐍𝐞𝐮𝐭𝐫𝐚𝐥 𝐖𝐢𝐫𝐞 𝐑𝐞𝐪𝐮𝐢𝐫𝐞𝐝. 2-pack motion sensor switch automatically turns on/off lights, fans, and motors based on the occupancy and vacancy detected in a room. Wall Plate Included
𝐒𝐢𝐧𝐠𝐥𝐞 𝐏𝐨𝐥𝐞 only. Not suitable for 3 way or multiple way. AUTO mode works as an occupancy sensor (Auto ON, Auto OFF). ON and OFF modes allow you to override the sensor and use the sensor switch as a regular light switch
Max Sensor Coverage Area 980 sq ft, 180º Field of View. Adjustable range and sensitivity from 30% to 100%, UL listed.
Occupancy sensor light switch variable time delay: 15 sec (test mode), 10 min, 20 min, 30 min, If the device does not work after installaton, please contact our support team
Please check with a qualified electrician to determine if you have the proper wiring. If the device does not work after installaton, please contact our support team
𝐍𝐞𝐮𝐭𝐫𝐚𝐥 𝐖𝐢𝐫𝐞 𝐑𝐞𝐪𝐮𝐢𝐫𝐞𝐝. 2-pack motion sensor switch automatically turns on/off lights, fans, and motors based on the occupancy and vacancy detected in a room. Wall Plate Included
𝐒𝐢𝐧𝐠𝐥𝐞 𝐏𝐨𝐥𝐞 only. Not suitable for 3 way or multiple way. AUTO mode works as an occupancy sensor (Auto ON, Auto OFF). ON and OFF modes allow you to override the sensor and use the sensor switch as a regular light switch
Max Sensor Coverage Area 980 sq ft, 180º Field of View. Adjustable range and sensitivity from 30% to 100%, UL listed.
Occupancy sensor light switch variable time delay: 15 sec (test mode), 10 min, 20 min, 30 min, If the device does not work after installaton, please contact our support team
Please check with a qualified electrician to determine if you have the proper wiring. If the device does not work after installaton, please contact our support team

Top WaffleMaker Reviews

TOPGREENER In-Wall PIR Motion Sensor Light Switch, Single Pole Occupancy Sensor Switch, Motion Sensor Switch, Need Neutral Wire, Wall Plate Included, On/Off Override, 4A, 500W, TSOS5-W, White, 2 Pack;