What Makes GHB Solar Charge Controller Different!
Adopts the advanced digital techniques and operates fully automatically.
With output switch, intelligent control, easy to operate.
LCD screen display makes all much more clear.
Power-efficient, Microcontroller digital accuracy.
Double USB Port, available for DC lamp and phone charging.
Use PWM&WPC mode, improve system efficiency and prolong the life span of the battery.
It has various unique functions and quite easy to use.
Speicifications:
Overload/Short Circuit Protection: 1.5 Times by Rated Current
Voltage of Battery: 12V / 24V Automatic
Rated Charge/Discharge Current: 20A
USB Output Voltage: 5V
Total USB Output Current: 3A
DC Output Voltage: 12V
Total DC Output Current: 2A
Short Circuit Recovery Time: 10s
Open Circuit Voltage of Solar Panel: 40V
No Load Loss: 0.05W
Over Voltage Protection: 15V; x2/24V
Float Charge Voltage: 14V; x2/24V
Discharge Recovery Voltage: 12V; x2/24V
Over Discharge Voltage: 10.5V; x2/24V
Control Mode: Software Intelligent Control
Working Temperature: -35~55°C
Item Size: 135 * 100 * 25mm / 5.31 * 3.94 * 0.98in (L * W * H)
Protection:
1. Over-load protection
2. Short circuit protection
3. Lightning protection
4. Under-voltage protection
5. Over-charging protection
6. Reverse Polarity protection
Package List:
1 * Solar Charge Controller
2 * DC Cable
1 * English User Manual
Notice:
Please connect to the battery first and then the panel.
Any question during use, please kindly contact our store to get the best after-service.
- LCD Screen Display: This solar panel charger controller with LCD to display all parameters, the LCD has rich contents, the users can intuitively know the working condition of the controller. The LCD display is with built-in energy-saving backlight LCD, display better, more clear, more beautiful, more modern and more power-efficient. (Please correctly connect the positive and negative terminals, makes sure all terminals are connected tightly.)
- Fully Automatic: This solar panel regulator with output switch, intelligent control, easy to operate, to connect the controller and the battery by cables with the right polarity. The battery indicator light on the controller will be on if successfully connected, otherwise, to check and reconnect.
- Power-efficient: Microcontroller digital accuracy, when it's charging, the arrow between the panel icon and the battery icon will flashe fastly, when the battery was a full charge, it will be slow flashed, will stop charging,the function of the controller is to protect the voltage overshoot and discharge. Available for DC lamp and phone charging. A key to open and close the load.
- Rated Discharge Current : 20A; USB Output Voltage: 5V; USB Output Current: 1.5A; DC Output Voltage: 12V-24V, DC Output Current: 20A. To connect your load and the cables with the right polarity and then connect with the load output port of the controller. Pay special attention to + - polarity to avoid reversed connection, otherwise, your load may be damaged.
- Protection Functions: Overload and Short circuit protection, Lightning protection, Under-voltage protection, Over-charging protection, Reverse Polarity protection. Use PWM&WPC mode, improve system efficiency and prolong the life span of the battery.
- LCD Screen Display: This solar panel charger controller with LCD to display all parameters, the LCD has rich contents, the users can intuitively know the working condition of the controller. The LCD display is with built-in energy-saving backlight LCD, display better, more clear, more beautiful, more modern and more power-efficient. (Please correctly connect the positive and negative terminals, makes sure all terminals are connected tightly.)
- Fully Automatic: This solar panel regulator with output switch, intelligent control, easy to operate, to connect the controller and the battery by cables with the right polarity. The battery indicator light on the controller will be on if successfully connected, otherwise, to check and reconnect.
- Power-efficient: Microcontroller digital accuracy, when it's charging, the arrow between the panel icon and the battery icon will flashe fastly, when the battery was a full charge, it will be slow flashed, will stop charging,the function of the controller is to protect the voltage overshoot and discharge. Available for DC lamp and phone charging. A key to open and close the load.
- Rated Discharge Current : 20A; USB Output Voltage: 5V; USB Output Current: 1.5A; DC Output Voltage: 12V-24V, DC Output Current: 20A. To connect your load and the cables with the right polarity and then connect with the load output port of the controller. Pay special attention to + - polarity to avoid reversed connection, otherwise, your load may be damaged.
- Protection Functions: Overload and Short circuit protection, Lightning protection, Under-voltage protection, Over-charging protection, Reverse Polarity protection. Use PWM&WPC mode, improve system efficiency and prolong the life span of the battery.
