Aetertek 919C Shock Control Pet Dog Training Collar Waterproof Rechargeable LCD Remote with 10 Level of Shock + beep+Vibration 1000 Yards Range (for 1 Dog);
Aetertek 919C Shock Control Pet Dog Training Collar Waterproof Rechargeable LCD Remote with 10 Level of Shock + beep+Vibration 1000 Yards Range (for 1 Dog)

Features:

1. Collar Size: Able to fit small, medium and large dogs. 15 lbs or Larger. Durable and adjustable TPU Collar Size Length from 10 to 23 inches long. easy to clean and free to cut to adjust the size
Buy Now From Amazon

Features:

1. Collar Size: Able to fit small, medium and large dogs. 15 lbs or Larger. Durable and adjustable TPU Collar Size Length from 10 to 23 inches long. easy to clean and free to cut to adjust the size
2. Includes one collar, Remote Transmitter can control up to two collars. (Extra collar is needed)
3. Battery Type: Rechargeable Lithium Batteries for Collar Receiver and remote
4. Water Capabilities: Water proof and submersible Collar Receiver. with it, dog can even to showering, swimming and diving
5. Range: 600 Yards
6.To avoid mis operation, you can lock the transmitter by pushing Up and Down button simultaneously. Do it again, it will be unlocked.
7. Three modes: beep,shock and vibrate.
8. Power saving design with Automatic Standby and Memory Function. remote will go into sleep mode if no use within 1 min.
9.Upgraded ON/OFF technology, just need to make the remote kiss the receiver, much more convenient and user friendly; (Bring the magnet on the transmitter near to the magnet switch on the receiver until the receiver vibrates.
10. Easy to operate and ergonomic Transmitter . In dog 00 mode, both dogs will be controlled.
11. Quick and straightforward pairing process.

Troubleshooting:

1. Please synchronise the transmitter and receiver before using.
2. There're 3 channels for this product, if you synchronise the transmitter and receiver in channel 1, the receiver collar can only be controlled in channel 1, it won't work in channel 2. 00 channel is for both dogs.
3. 12 months warranty is provided.
4. If the remote die, you can reset the system by pushing the reset button on the back of remote

Package Contents: (Training 1 dog)

1 transmitter · 1 receiver · 1 Charger · 1 High quality adjustable dog collar strap (about 65cm/25 inches) · 1 pair of Test bulb and metal prongs · 1 User's manual · 1 Durable carry-and-go storage bag ·

  • USER FRIENDLY - The dog training collar works from up to 600 yards away! used electromagnetic induction switching method which makes it is easier to turn on/off and more durable; Convenience, Easy-to-read LCD screen shows the stimulation level. 1 year warranty is provided;
  • Points to ensure while sycing : 1： recharge the receiver and remote for 3 hours. Make sure the shock intensity level of the remote is not on ZERO 2： Check whether the antenna is installed correctly. screw the antenna tightly. on to the remote. 3： Ensure the receiver is turned on and in sync waiting status(the red LED light is on). 4: Choose dog 1, Push any of the function buttons (shock or beep or vibrate) immediately on the transmitter. Once the receiver and transmitter matched, the Red LED light turns off and the Blue LED light flashes every 10 seconds. It means the remote and receiver synced successfully
  • CORRECTION MODES - Dog Training Collar with 3 modes: vibration, shock and beep. 10 levels of accurate static shock stimulation.
  • PACKAGE INCLUDED: 1 rechargeable remote 1 rechargeable and 100% waterproof receiver (dog can swim, shower or diving )1 TPU collar 1 USB 5.0 charger 1 High quality adjustable dog collar strap (about 65cm/25 inches) · 1 pair of Test bulb and metal prongs · 1 User's manual · 1 Durable carry-and-go storage cloth bag · 1 lanyard(beautiful color, do not fade); ADJUSTABLE COLLAR - The dog collar is made out of high quality comfortable TPU and it is adjustable to fit breeds of nearly all sizes for small dogs and large dogs. TPU collar is durable and free to cut.
  • customers need to sync the system correctly, the item will work then. (sync steps: turn receiver on, choose dog mode on the remote. dog 1 or dog 2 is ok. dog 00 means both dogs. please don't choose dog 00. then push shock or vibrate or beep button on the remote, the receiver will beep and vibrate which means they are matched successfully.) secondly, please charge the remote and receiver every 3 days. Receiver will last 2-3 days after one full charge while remote can last 10 days. The duration time may vary depend on the usage frequency.
  • USER FRIENDLY - The dog training collar works from up to 600 yards away! used electromagnetic induction switching method which makes it is easier to turn on/off and more durable; Convenience, Easy-to-read LCD screen shows the stimulation level. 1 year warranty is provided;
  • Points to ensure while sycing : 1： recharge the receiver and remote for 3 hours. Make sure the shock intensity level of the remote is not on ZERO 2： Check whether the antenna is installed correctly. screw the antenna tightly. on to the remote. 3： Ensure the receiver is turned on and in sync waiting status(the red LED light is on). 4: Choose dog 1, Push any of the function buttons (shock or beep or vibrate) immediately on the transmitter. Once the receiver and transmitter matched, the Red LED light turns off and the Blue LED light flashes every 10 seconds. It means the remote and receiver synced successfully
  • CORRECTION MODES - Dog Training Collar with 3 modes: vibration, shock and beep. 10 levels of accurate static shock stimulation.
  • PACKAGE INCLUDED: 1 rechargeable remote 1 rechargeable and 100% waterproof receiver (dog can swim, shower or diving )1 TPU collar 1 USB 5.0 charger 1 High quality adjustable dog collar strap (about 65cm/25 inches) · 1 pair of Test bulb and metal prongs · 1 User's manual · 1 Durable carry-and-go storage cloth bag · 1 lanyard(beautiful color, do not fade); ADJUSTABLE COLLAR - The dog collar is made out of high quality comfortable TPU and it is adjustable to fit breeds of nearly all sizes for small dogs and large dogs. TPU collar is durable and free to cut.
  • customers need to sync the system correctly, the item will work then. (sync steps: turn receiver on, choose dog mode on the remote. dog 1 or dog 2 is ok. dog 00 means both dogs. please don't choose dog 00. then push shock or vibrate or beep button on the remote, the receiver will beep and vibrate which means they are matched successfully.) secondly, please charge the remote and receiver every 3 days. Receiver will last 2-3 days after one full charge while remote can last 10 days. The duration time may vary depend on the usage frequency.

Similar Products

Barbestar Instant Read Thermometer, Electronic Digital Food Meat Thermometer with Long Probe, Includes Internal Meat Temperature Guide, Gift Box Perfect for Kitchen Grill( Red )ACLUXS iPhone 7 Plus Case, [Shockproof] [Drop Protection] [Heavy Duty] Tough Rugged Hybrid Hard Shell Cover Case with Belt-clip for Apple iPhone 7 Plus [5.5 inch]-BlackGalaxy J3 Case, J3 Case, Express Prime Case, Amp Prime Case,Kmall [Metal Brushed Texture] Heavy Duty Hybrid Dual Layer Full-Body Shockproof Protective Cover Shell For Samsung Galaxy J3 J320[Rose Gold]LG Tribute HD Case, LG X Style Case, LG Volt 3 Case, UrSpeedtekLive[Shock Absorpt] Studded Rhinestone Bling Hybrid Dual Armor Defender Cover Case for LG Tribute HD / X Style / Volt 3 - Don't TouchGPC Image 10 Pack Compatible Ink Cartridge Replacement for Brother LC103XL LC103 XL LC 103 (4 Black, 2 Cyan, 2 Magenta, 2 Yellow) for Brother MFC-J870DW MFCJ6920DW MFCJ4510DW MFCJ875DW MFC-J470DWGalaxy Note 5 Waterproof Case, Vcloo 20ft Full Sealed Galaxy Note 5 Waterproof Case, Dust Proof, Snow Proof, Shock Proof Case, Heavy Duty Protective Carrying Cover Case for Galaxy Note 5 (Black)LxTek Compatible Toner Cartridge Replacement Set For HP CE285A 85A (1 Black) For use in HP LaserJet Pro P1102 P1102w P1109w M1217nfw M1212nf M1132 M1214nfh Printer