Specifications:
1.Solar panel: 2V/ 0.3W2.Light color: Muti-colors
3.Length of the light strand: 25ft
4.Length between 2 bulbs: 0.4ft
5.Working voltage:0.95-1.35V
6.Working current: 55MA
7.Working temperature: -20℃~+60℃
8.Light source: Super bright led
10.Charging time: 5~6h
11.Working time: steady on mode 8~l5h, flash mode 10~20h
12.Eight modes: Combination, Waves, Sequential, Slo-Glo，Chasing/Flash, Slow fade, Twinkle/Flash, Steady on
General Introduction: The solar light consist solar panel,ground spike and 30 LED solar string lights. And the three parts are preassembled. Light from the sun charges the built-in batteries during. The day time and the energy stored in the batteries to power the lights at night
The lights-on time maybe vary, depending on how much power received from sunlight during day time
Install Introduction: 1. The light is designed for outdoor use only in an open location for receiving direct sunlight
2. Please avoid putting the unit under shadows from buildings, trees and walls
3. The unit is designed to illuminate in dark Conditions and may not operate if other source of strong lights reflects on the panel Please avoid street light and floodlights to impact the PIR Sensor
Use Instruction: 1. Remove the package and make sure everything is in a good condition
2. Assemble the solar panel to the cradle on the anchor spike
3. Turn te ON/Off switch at the bottom to the "ON" position
4. Switch the eight modes by pressing the "MODE"
5. Put the light at the tight and safe place
