THESE SPACERS WILL SLIP OVER THE HUB ON THE FOLLOWING VEHICLES (WILL REQUIRE LONGER STUDS FOR OPTIMAL PERFORMANCE)
- 1980-1984 Audi 4000
1984-1985 BMW 318i
1990-1991 BMW 318i
1990-1991 BMW 318is
1985-1991 BMW 325e
1985-1991 BMW 325i
1986-1991 BMW 325ic
1985-1991 BMW 325is
1987-1990 BMW 325ix
1975-1986 Chevrolet Chevette
1981-1985 Chrysler Lebaron
1981-1985 Chrysler New Yorker
1980-2003 Volkswagen Cabriolet
1989-1993 Volkswagen Corrado
1985-1998 Volkswagen Golf
1980-1998 Volkswagen Jetta
1990-1997 Volkswagen Passat
1980-1989 Volkswagen Srirocco
ADDITIONAL INFORMATION
- Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
- Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
- Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
- Your lugs studs will need to be shortened by grinding them down
- You can replace your studs will shorter studs
- if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS