uxcell G1/2 inches Water Brass Solenoid Valve Normal Close Electromagnetic Valve 12V;

Descriptions:
1.This is a Inlet Feed Water Solenoid Valve for hot Liquid no more than 120℃,Turn on water when system start and cut off water when system stop.

Specifications:
Product Name: Solenoid Valve
Material: Brass(Shell)
Liquid Temperature: Not More Than 120C
Working Voltage Range: DC 12V
Maximum water pressure: 1.75MPa
Size: 64mm x 41mm x 60.4mm(L*W*H)
External Thread Diameter: G1/2"
working water pressure :0.02-0.8MPa
Tube Length: 64mm
Color: Gold Tone
Net Weight: 236g

Install and use attentions:
1. the water solenoid valve selects the corresponding voltage and temperature according to the actual situation when selecting type.
2.When install the solenoid valve,medium flow diretion must be consistent with the direction arrow as shown in the valve body,the valve must be installed in horizontal pipe runs.Solenoid valve coil keep in a vertical position,the valve can not be put in these places what with the splashing water or water leakage.
3.Please install a filter screen at the inlet end to avoid inhalation of impurities so that the solenoid valve can not be reset, resulting in water closes or obstructed opening.
4.If the solenoid valve is closed or blocked, please open the top four screws to clean the inner cavity impurities.
5.In using should be regular cleaning dirt on the surface of the movable iron core and the piston,in dismouting should check the sealing gasket at the same time,when found damaged should be replaced timely.

Package Included:
1 x Solenoid Valve