THESE SPACERS WILL SLIP OVER THE HUB ON THE FOLLOWING VEHICLES
- 2009-2015 - Audi - A4/S4
2009-2015 - Audi - A5/S5
MERCEDES:
1994-2000 W202 C Class C220, C230, C280, C43 AMG
2002-2007 W203 C Class C230, C240, C320, C32 AMG, C55 AMG (Rear Only)
2008-2011 W204 C Class C300, C350, C63 AMG
2000-20011 W215 & W216 CL Class CL500, CL600, CL63 AMG, CL65 AMG (Rear Only)
1997-2009 W208 & W209 CLK Class CLK320, CLK350, CLK430, CLK500, CLK550, CLK55 AMG (Rear Only)
2004-2010 W219 CLS Class CLS320, CLS350, CLS500, CLS550 (Rear Only)
1996-2002 W210 E Class E320, E420, E430, E55 AMG
2003-2009 W211 E Class E320, E350 (Rear Only)
2000-2012 W212 E Class E350, E500
2000-2005 W220 S Class S320, S400, S420, S500, S600
2006-2010 W221 S Class S320, S350, S450, S600, S63 AMG (Rear Only)
1994-2002 R129 SL Class SL320, SL500, SL600 2003-2010 - R230 - SL Class - SL500, SL600, SL550, SL55 AMG, SL65 AMG (Rear Only)
1997-2003 R170 SLK Class SLK230, SLK320
2004-2010 R171 SLK Class SLK280, SLK350, SLK55 AMG (Rear Only)
ADDITIONAL INFORMATION
- May NOT WORK with stock length studs. Extended Wheel Studs may be needed for proper installation
- Simple, bolt-on installation with minimal tools
- Spacers are Made of Forged Billet T6 6061 Aluminum
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
- Your lugs studs will need to be shortened by grinding them down
- You Can Cut Your Existing Studs To The Correct Length
- if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS
