I.M.S. produces a range of competition filters designed to bring out the best in your coffee. The SHAPE and PERFORATION have been designed and calibrated so as to ensure the ideal extraction. The recalibration of the perforation type means that there is uniformity in the diameter of the holes and the surface mirror finish facilitates cleaning of the filter. NOTE: Not all spouted portafilters are deep enough to allow for the use of this competition basket insert. If you are unsure of the portafilter depth compatibility we recommend using a bottomless portafilter or contacting the vendor from whom you purchased your machine.
- I.M.S. produces a range of competitive filters that bring out the most out of your coffee.
- Description: Average capacity 18/22 grams | B70 2TC H28.5 E
- Shape: border: 70 mm (B70) | height: 28.5 mm (H28.5) | corpo: 60 mm for 58 mm tamper | ridgeless | shape: cylindrical with convex base | the shape was made by I.M.S. created to maintain the correct ratio between the bottom and height of the coffee puck in terms of capacity. The filter is cylindrical with a specific corner rounding at the bottom. This mould is designed to use the whole coffee puck, which also makes drying and exit easier.
- Perforation: I.M.S. Perforation is exclusive and patented | Perforated area: 49 mm | Area optimized in terms of the shape of the filter | Number of holes: 715 Micro Pitch (E) | Number and distribution of perforations are designed to balance delivery in terms of height and shape of the filter and hole area. | Hole diameter: 0.30 mm | Hole shape: circle with conical cross section | Competition perforation: Relaminated and recalibrated
- IMS. producerer en række konkurrencefiltre, der får mest muligt ud af din kaffe.
- I.M.S. produces a range of competitive filters that bring out the most out of your coffee.
- Description: Average capacity 18/22 grams | B70 2TC H28.5 E
- Shape: border: 70 mm (B70) | height: 28.5 mm (H28.5) | corpo: 60 mm for 58 mm tamper | ridgeless | shape: cylindrical with convex base | the shape was made by I.M.S. created to maintain the correct ratio between the bottom and height of the coffee puck in terms of capacity. The filter is cylindrical with a specific corner rounding at the bottom. This mould is designed to use the whole coffee puck, which also makes drying and exit easier.
- Perforation: I.M.S. Perforation is exclusive and patented | Perforated area: 49 mm | Area optimized in terms of the shape of the filter | Number of holes: 715 Micro Pitch (E) | Number and distribution of perforations are designed to balance delivery in terms of height and shape of the filter and hole area. | Hole diameter: 0.30 mm | Hole shape: circle with conical cross section | Competition perforation: Relaminated and recalibrated
- IMS. producerer en række konkurrencefiltre, der får mest muligt ud af din kaffe.
