Description:
For iphone 6s plus 5.5 (NOT 4.7)inch with 3D touch
If your device that works great, but the display is damaged in some way, this auction is what you need
It is used to repair faulty screen, this will also cure: display problems, dead pixels, cracked screens, wrong color issues
Each item is tested before shipping to ensure 100% functionality .
Note: Instruction is included. Professional technician is needed for installation.
Free tools as the picture .
- Power off your iPhone before beginning disassembly. Remove the two 3.6 mm Pentalobe screws next to the Lightning connector. Press a suction cup onto the screen, just above the home button. Be sure the cup is pressed securely onto the screen to get a tight seal. Using a plastic opening tool, begin to gently pry the rear case down, away from the display assembly, while continuing to pull up with the suction cup.
- Several clips along the top edge of the front panel form a partial hinge. During reassembly, align the clips just below the top edge of the rear case. Then, slide the front panel upward until its top edge is flush with that of the rear case.
- There are several clips holding the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly. Pull the plastic nub to release the vacuum seal on the suction cup. Remove the suction cup from the display assembly. Open the iPhone by swinging the home button end of the front panel assembly away from the rear case, using the top of the phone as a hinge.
- Screen for iPhone 6S plus 5.5",NOT for 4.7" To replace your damaged, cracked, shattered screen, or screens with display or touch response issues 100% QC before shipment,any trouble,please contact us soon
- The LCD is without home button,ear piece and front camera,just same as the pictures. Package include: 1x White Assembly LCD Digitizer for iPhone 6S plus 5.5", 1x repair Tool kits. All cables and screws should be connented exact place of the phone. Any small mistake would be caused kinds of problems.
- Power off your iPhone before beginning disassembly. Remove the two 3.6 mm Pentalobe screws next to the Lightning connector. Press a suction cup onto the screen, just above the home button. Be sure the cup is pressed securely onto the screen to get a tight seal. Using a plastic opening tool, begin to gently pry the rear case down, away from the display assembly, while continuing to pull up with the suction cup.
- Several clips along the top edge of the front panel form a partial hinge. During reassembly, align the clips just below the top edge of the rear case. Then, slide the front panel upward until its top edge is flush with that of the rear case.
- There are several clips holding the front panel assembly to the rear case, so you may need to use a combination of the suction cup and plastic opening tool to free the front panel assembly. Pull the plastic nub to release the vacuum seal on the suction cup. Remove the suction cup from the display assembly. Open the iPhone by swinging the home button end of the front panel assembly away from the rear case, using the top of the phone as a hinge.
- Screen for iPhone 6S plus 5.5",NOT for 4.7" To replace your damaged, cracked, shattered screen, or screens with display or touch response issues 100% QC before shipment,any trouble,please contact us soon
- The LCD is without home button,ear piece and front camera,just same as the pictures. Package include: 1x White Assembly LCD Digitizer for iPhone 6S plus 5.5", 1x repair Tool kits. All cables and screws should be connented exact place of the phone. Any small mistake would be caused kinds of problems.
