uxcell 12V DC 550RPM Gear Motor Electric Micro Speed Reduction Geared Motor Centric Output Shaft;
uxcell 12V DC 550RPM Gear Motor Electric Micro Speed Reduction Geared Motor Centric Output Shaft


D shaped shaft with 6mm diameter, 14mm Long.

Note： Motor torque is very small, do not overload use; When the load is further increased above its overload region, the speed of the motor gradually reduce...

Buy Now From Amazon


D shaped shaft with 6mm diameter, 14mm Long.

Note： Motor torque is very small, do not overload use; When the load is further increased above its overload region, the speed of the motor gradually reduces and the motor stalls. It can cause the motor stop working or burn out.



  • 【QUALITY UPGRADED】Galvanized surface treatment, high-temperature resistance, high abrasion resistance, sturdy and durable, effectively protect the gear box motor body. With precision winding technology, the geared motor power instant increased by 30%.
  • 【TECHNICAL SPECIFICATION】No-load Speed: 550RPM at 12V | Torque: 3Ncm | Power: 7.2W | No-load Current: 0.15A | Load Current: 0.6A | Reduction rate: 1: 9 | Mounting Screw Size: M3 (not included).
  • 【D SHAPED OUTPUT SHAFT】Using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable.
  • 【POSITIVE-NEGATIVE ROTATION】You also can adjust the speed, but the motor speed can only be reduced, can not be raised.
  • 【WHAT YOU GET】A pretty small little motor, has gear reduction box and motor in one small package. Any quality issues, we promise 100% unconditional return service. If you need other voltage and rpm, please feel free to contact us!
  • 【QUALITY UPGRADED】Galvanized surface treatment, high-temperature resistance, high abrasion resistance, sturdy and durable, effectively protect the gear box motor body. With precision winding technology, the geared motor power instant increased by 30%.
  • 【TECHNICAL SPECIFICATION】No-load Speed: 550RPM at 12V | Torque: 3Ncm | Power: 7.2W | No-load Current: 0.15A | Load Current: 0.6A | Reduction rate: 1: 9 | Mounting Screw Size: M3 (not included).
  • 【D SHAPED OUTPUT SHAFT】Using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the gear motor are improved, extremely durable.
  • 【POSITIVE-NEGATIVE ROTATION】You also can adjust the speed, but the motor speed can only be reduced, can not be raised.
  • 【WHAT YOU GET】A pretty small little motor, has gear reduction box and motor in one small package. Any quality issues, we promise 100% unconditional return service. If you need other voltage and rpm, please feel free to contact us!

Similar Products

uxcell GA/GB 37mm diameter DC Geared Motor Mounting Bracket Holder 6mm Hex Couplinguxcell 12V DC 100RPM Gear Motor High Torque Electric Micro Speed Reduction Geared Motor Centric Output ShaftGreartisan DC 12V 550RPM Gear Motor High Torque Electric Micro Speed Reduction Geared Motor Centric Output Shaft 37mm Diameter Gearboxuniquegoods 6V 12V 24V 28V 3A 80W DC Motor Speed Controller (PWM) Speed Adjustable Reversible Switch 1203BB DC Motor Driver ReversingRioRand 12V-40V 10A PWM DC Motor Speed Controller with Knob-High Efficiency, High Torque, Low Heat Generating with Reverse Polarity Protection, High Current ProtectionGreartisan DC 12V 100RPM Gear Motor High Torque Electric Micro Speed Reduction Geared Motor Centric Output Shaft 37mm Diameter GearboxRioRand RR-PWM-15V Low Voltage Dc 1.8v 3v 5v 6v 12v 2a Motor Speed Controller Pwm,ARDUINO UNO R3 [A000066]