Good Idea:
You can only cut the part of silicone tube and bent the led lights back inside the "collar" remaining to got double the lights in it.
Instruction:
The collar is a "Cut to Length" one. Meaning you can cut its length for your dogs or pets by yourself. Please refer to the following:
1.Please measure the neck length of your pets precisely.
2.Be sure the collar is OFF when you are ready to cut.
3.Pull the end of the silicone tube where it has a "SCISSORS" mark on the white control piece.
4.Turn it on briefly to line up your scissors then off again before you begin to cut. Since each LED is grounded at its soldered point and you can cut between two LED lights.
5.The LED's you cut off will no longer work once cut from the power source.
6.The ones remaining will still work and push it into the white control piece.
7.If you would like to recharge it please use the cable in the package connect with device, e.g. Computer USB port or smart phone charger.
8.There are total 6 colors: Red, Blue, Green, Orange, Pink and Black. Please choose what color you like and take care of your dog.
9.Charge time:1.5~2.5 hours. Usage time: >4hours for fast glow, >5 hours for slow glow, >1.2 hours for steady time. Indicator light will turn off when full charge.
Package Includes:
1 * Bseen LED flashing dog collar
1 * Bseen USB cable
Warranty:
Bseen is committed to 100% Satisfaction and 60 Days Guarantee for our customers.
So any problem,please feel free to contact with us! Our Friendly Service - 24 hours email customer service response.
Good Idea:
You can only cut the part of silicone tube and bent the led lights back inside the "collar" remaining to got double the lights in it.
Instruction:
The collar is a "Cut to Length" one. ...
Similar Products
