NOTE: FITS THE GEN 2 SUB-2000 ONLY (serial number on the bolt tube). DOES NOT FIT THE GEN 1 SUB-2000 (serial number on the receiver).
The Gen 2 Bolt Tube Cover is made from Santoprene, a thermoplastic elastomer that combines the best qualities of synthetic EDPM and polypropylene. It's a tough and abrasion resistant armor for your SUB-2000's bolt tube. Laser etched trim guides are provided if you would like to shorten the Gen 2 Bolt Tube Cover for one of the two shorter stock positions. The Operating Handle Cover is made from a soft durometer PVC. Both products are chemically resistant, UV sunlight resistant and ozone resistant.
Most people could install these upgrades in a few minutes. Simply remove the butt stock and slide the Bolt Tube Cover in place. The Operating Handle Cover is heated in hot water and slipped onto the operating handle. A detailed instruction sheet is provided for each product.
Gen 2 Bolt Tube Cover Technical Specifications
Weight: .81 ounces 23.0 grams
Length: 5.26 inches 134 mm
Outer Diameter: 1.188 inches 30.16 mm
Durometer (Hardness): 72 Shore A
Tensile Strength: 1070 PSI 7.40 MPa
Operating Temperature: -76 F to +275 F -60 C to +135 C
Flame Resistance Rating: UL94HB
Operating Handle Technical Specifications:
Weight: .084 ounces 2.4 grams
Length: .750 inches 19.1 mm
Diameter: .625 inches 15.9 mm
Durometer (hardness): 64 Shore A
Tensile Strength: 2250 PSI 15.6 MPa
Operating Temperature: -6 F to +165 F -21 C to 74 C
Flame Resistance Rating: UL94V0
- Two customer favorites in one convenient bundle to improve the comfort and utility of your Gen 2 SUB-2000.
- The Bolt Tube Cover provides a comfortable cheek weld by insulating the shooter from shock loads and temperature extremes. The Operating Handle Cover provides a soft cushion between the finger and charging handle.
- FITS THE GEN 2 SUB-2000 ONLY (serial number on the bolt tube). DOES NOT FIT THE GEN 2 SUB-2000 with the shorter knurled collar. If the distance between the collar and the fully entended butt stock is 5-3/8", order the Gen 2XL Bolt Tube Cover. DOES NOT FIT THE GEN 1 SUB-2000. The GEN 1 version is available on Amazon.
- Improves comfort and ergonomics. Resistant to UV, sunlight, heat, cold, solvents and lubricants.
- Made in the USA - Unconditional lifetime warranty
- Two customer favorites in one convenient bundle to improve the comfort and utility of your Gen 2 SUB-2000.
- The Bolt Tube Cover provides a comfortable cheek weld by insulating the shooter from shock loads and temperature extremes. The Operating Handle Cover provides a soft cushion between the finger and charging handle.
- FITS THE GEN 2 SUB-2000 ONLY (serial number on the bolt tube). DOES NOT FIT THE GEN 2 SUB-2000 with the shorter knurled collar. If the distance between the collar and the fully entended butt stock is 5-3/8", order the Gen 2XL Bolt Tube Cover. DOES NOT FIT THE GEN 1 SUB-2000. The GEN 1 version is available on Amazon.
- Improves comfort and ergonomics. Resistant to UV, sunlight, heat, cold, solvents and lubricants.
- Made in the USA - Unconditional lifetime warranty
