PEX Tubing 1/2 Inch Potable Water Pipe 2 Rolls X 300Ft Tube Coil PEX-B Non Oxygen Barrier Piping for Hot Cold Plumbing and Radiant Floor Heating Applications
Introduction:
This Non Barrier PEX Plumbing Tubing is used for residential and light commercial hot and cold water plumbing applications. It can also be used for Open Loop Radiant Heating Systems as well as distribution lines for open loop heating systems.
Applications:
Plumbing applications (residential and light commercial hot and cold water)
Open loop radiant heating systems
Expander Fitting System
Crimp Connection System (Crimp Tool + Crimp Rings + Crimp Fittings)
Cinch (Clamp) Connection System (Cinch Tool + St. Steel Clamps + Crimp Fittings)
Compression Pex Fittings
Structural Concrete Slabs (Rebar Or Wire Mesh Reinforced Slabs)
Non-Structural Slabs (Thermal Mass, Gypsum Slabs)
Staple-Up (Between Joists) Radiant Floor Heating With And Without Heat Transfer Plates
"Sandwich" Types Radiant Heating (Between Subfloor And Finished Floor)
Snow & Ice Melting Systems
Baseboard & Radiator Heating Systems
Item Specifications:
PEX Type: PEX-B
PEX Tubing Size: 1/2"
ID: 0.485"
OD: 0.625"
Color: Red/Blue
Length: 2 X 300 Ft
Material: Cross-Linked Polyethylene Pipe
Minimum Bending Radius: 5" (Industry Standard For 1/2" PEX)
Pressure Ratings: 80 psi @ 200F, 100 psi @ 180F, 160 psi @ 73F By PPI
Maximum Working Pressure (Psi) : 0.86 MPa/Year
Maximum Working Temperature (F): 203℉/ 95℃
Minimum Working Temperature (F) : -40℉/-40℃
Package Included:
2 Rolls * 1/2" PEX Tubing 300Ft
- Length: 2 Rolls X 300Ft; PEX Type: PEX-B; Color: Red & Blue; Nominal Diameter: 1/2"; ID: 0.485"; OD: 0.625"; Material: Cross-Linked Polyethylene Pipe
- Minimum Bending Radius: 5" (Industry Standard For 1/2" PEX); Pressure Ratings: 80 psi @ 200F, 100 psi @ 180F, 160 psi @ 73F By PPI; Maximum Working Temperature (F): 203℉/ 95℃, Minimum Working Temperature (F) : -40℉/-40℃; Maximum Working Pressure (Psi) : 0.86 MPa/Year
- The strong, flexible, corrosion-resistant of the PEX pipe tubing reduces number of fittings needed to complete a job, as well as reducing cost and leak points
- Plumbing applications for hot and cold water (typically use blue for cold and red for hot); The PEX Tube Coil is also ideal for indoor or outdoor hydronic radiant heating, washing machine and snow-melting applications
- Tubing is marked every 5ft with length, ASTM standards, approvals, certifications, pressure ratings and other technical information
- Length: 2 Rolls X 300Ft; PEX Type: PEX-B; Color: Red & Blue; Nominal Diameter: 1/2"; ID: 0.485"; OD: 0.625"; Material: Cross-Linked Polyethylene Pipe
- Minimum Bending Radius: 5" (Industry Standard For 1/2" PEX); Pressure Ratings: 80 psi @ 200F, 100 psi @ 180F, 160 psi @ 73F By PPI; Maximum Working Temperature (F): 203℉/ 95℃, Minimum Working Temperature (F) : -40℉/-40℃; Maximum Working Pressure (Psi) : 0.86 MPa/Year
- The strong, flexible, corrosion-resistant of the PEX pipe tubing reduces number of fittings needed to complete a job, as well as reducing cost and leak points
- Plumbing applications for hot and cold water (typically use blue for cold and red for hot); The PEX Tube Coil is also ideal for indoor or outdoor hydronic radiant heating, washing machine and snow-melting applications
- Tubing is marked every 5ft with length, ASTM standards, approvals, certifications, pressure ratings and other technical information
