FVT LittleBee 30A S ESC BLHeli_S allows your motors to respond to throttle decreases much quicker, allowing for more stable flying, and higher response to throttle decreases.
1.Oneshot125 is a different and faster communication protocol between the flight controller and the ESC on your quadcopter.
2.Damped mode.This feature allows your motors to respond to throttle decreases much quicker, allowing for more stable flying, and higher response to throttle decreases.
3.Easy upgrades: You can flash the lastest firmware using the 3pin connector and suitable USB adapter and now can be used via the cleanflight GUI please note you will need to be running the Betaflight firmware to connect via the cleanflight interface but this is a simple way of adjusting and tweaking the settings of your escs.
4.These ESCs do not have a BEC, you will need to supply 5v power to your flight controller with a UBEC or stepdown voltage regulator.
Description:
Item Name: FVT LittleBee 30A-S ESC
Input Voltage: 2-6S Lipo
BEC Output: No
Continue Current: 30A, Burst Current: 35A up to 10S
Size: 35*17mm
Weight: 9g(include Power and signal wire)
Support Damped mode, Oneshot125, Oneshot42 and Multshot
Main IC: SILABS EFM8BB21F16, MCU run 48MHz
MOS: Both low and high side fets are Nfets
Package Including:
4* LittleBee FVT 30A S ESC BLHeli_S
Important Tip:
Some seller sell FAKE or Inauthentic Littlebee ESC, which has infringed the right of patent. The owner of Littlebee provide the way to tell if your ESC is authentic. Below is the details:
Step 1. Find the lable on the pacakge, and Scratch coating to get the anti-counterfeit codes.
Step 2. Enter the code to check it if it authentic or not on their web: http://www.szfvt.com/
Any other questions or needs, just feel free to contact us.
