Mokasi® 6 Propellers Mini Pocket Drone, 2.4Ghz 4CH 6-Axis Gyro RC Micro Quadcopter with 3D Flip, Headless Mode,Nano Copters RTF Mode 2 Blue;

Package Included:

1 x Mini RC Quadcopter
1 x 2.4Ghz Control Transmitter (Mode 2: Left hand throttle)
1 x 3.7V 120mah Battery (Build-in)
1 x USB Charging Cable
6 x Spare Propellers
6 x Propeller Protect Frames
1 x Screwdriver
1 x User Manual

!! NOTE !!

There are two common situations the drone can not work properly :

<1>. The drone is not connected to the remote control, Follow the instructions below to ensure that the drone can be connected to the remote control
1. Pull the throttle stick to the lowest point.
2.Switch on the drone and put it on the level ground. The indicator of the drone will be flashing.
3.Switch on the remote control, the remote control emits the sound "Di", pull the throttle stick to the highest point, then hit the lowest again. If the remote control issues a 'DI' sound again and the lights of drone stop flashing, the connection is successful.

For the issue that the drones won't hover or work properly. Please follow the instructions below:

<1>. Accelerator Alignment
When the connection of drone and remote control is completed, Push the throttle to the lower left corner and the direction stick to the lower right corner. If the indicator of the drone flash 1-2 seconds, the alignment is successful.

<2>Flying Scope
The flying scope of this drone is about 20m and if beyond the scope, it would be out of control.
The drone shall fly to keep about 1m away from the ground.
The mini drone can't flight in strong wind.
Make sure the throttle is being raised suf ficiently. If the unit still does not go up or goes up too slowly, the battery of the quadcopter might be too discharged for safe or satisfactory operation. Charge the battery before continuing to fly the unit.