MAX GPE RV Repair Panel Delamination, Injectable Glue -Wood Rot & Soggy Floors Stabilizer, Thin Consistency & Long Working Time for Deep Absorption -Very Strong Adhesive, Sealer, Fiberglassing Resin;

MAX GPE A/B is a low viscosity (thin) epoxy resin that offers a long working time designed to provide a broad range of repair and fabricating applications. It works well as an injectable adhesive for repairing delaminated RV panels made from Filon, Azdel, Luan plywood, and other FRP substrates used in RV structures. It will not melt styrofoam insulation boards.

The long working time keeps the resin in a liquid state longer to allow it to seep into tight crevices and upon cure, it yields a very strong bond. MAX GPE A/B can also be used to reinforce wood rotted and soft floors.  

MAX GPE A/B is mixed 2:1 by volume of by weight. It works well as a waterproof coating for wood, metals, fiberglass, carbon fiber composites. It is also used as an impregnating resin for fiberglass lay-ups that demonstrates high mechanical properties.

PHYSICAL PROPERTIES
Viscosity: 900 cPs Mixed @ 25°C
Mis Ratio: 2:1
Working Time: 90 Minutes, 200 Gram Mass
Set-To-Dry:6 Hours @ 25°C
Handling Time:8 Hours @ 25°C
Full Cure Timer:48 Hours @ 25°C

MECHANICAL CURED PROPERTIES (Tested @ 25°C)
Hardness: 78 Shore D Durometer
Tensile Strength: 9600 psi
Tensile Shear Strength: 2700 psi (Al to Al)
Tensile Modulus: 460,000 psi
Elongation:3.8%
Compressive Strength: 12,300 psi

Video Demonstrations (Copy And Paste Links)
Filon To Azdel Tensile Shear Test
https://youtu.be/TuVrE8r1luk

Customer Submitted Videos
https://youtu.be/5YJWKWWxSlU
https://youtu.be/bf6Uquteslo

Available Kit Sizes
96 Ounce Kit
https://www.amazon.com/dp/B01J1CTW6A
1.5 Gallon Kit
https://www.amazon.com/dp/B01J1CGOWA