More lighting and zero cost:
Kumeda 24 LED Solar Motion Sensor Light with built-in battery and solar panel absorbs solar energy, use of the process to bring you zero consumption. This device has three light levels: namely dim, moderate, and high, and two modes. Both modes are only on when it is dark.
2 Modes & 3 light levels:
* When the lights are on they are at the moderate level all the time;
* When the lights are on they are at the dim level until if/when motion is detected, upon which they switch to high. They stay at high until no motion has been detected for 15 seconds, then they revert to dim.
Note: When you turn on one of the devices, it is almost certain that doing so will trigger motion detection. As a result, if you then toggle the mode switch, you will toggle the light level between moderate and high. Thus, if you want the dim/high mode, choose the setting for which the light is brighter.
Specifications:
1.Solar panel: 5.0V, 1.3W,17% efficiency
2.Li-ion battery: 18650 lithium battery 2200mAh
3.2 buttons:one for power on/off; one for mode switch
4.Solar charging time: less than 6 hours
5.LED:24 PCS,1 W,288 Lumens;
6.Angle-adjustable panel for optimum sun shine exposure
7.Rotatable light tube for lighting where you want
8.Working time: 10~12 hours when fully charged
Package Include:
1 x Sensitive LED Light
1 x Solar Panel(build-in rechargable Battery)
1 x Holder
2 x Screw Set
1 x User Manual
Note:
* If your ground is too hard,do not twist or hammer it with force.Try to soften the ground with water ande then insert into the ground.Failure to follow this may result in product damage.
* The efficiency of solar panels significantly rely on the strength of sunlight.On cloudy/foggy days,or in winter,solar energy may not be sufficient to support the bright light for a long time.