The best for inlay work! Solid carbide lasts far longer than steel, and reverse spiral flutes cut downward for cleaner, "no fuzz" edges in routed cavities.
Width of cut 1/16" (1.59mm)
Depth of cut 3/16" (4.78mm)
Each bit is 1-1/2" (38.10mm) long with a 1/8" (3.18mm) shank for Dremel and other rotary tools.
Use a larger inlay bit for removing wood in the middle of your inlay work, and save this bit for the fine details. The fine detail bits are fragile, for routing intricate details only.
- For fine detail inlay routing
- Solid carbide lasts far longer than steel
- Reverse spiral flutes cut downward for cleaner, "no fuzz" edges in routed cavities
- Length 1-1/2" (38.10mm), shank diameter 1/8" (3.18mm)
- Comes in sturdy protective case, with bit cutting diamater size clearly marked
- For fine detail inlay routing
- Solid carbide lasts far longer than steel
- Reverse spiral flutes cut downward for cleaner, "no fuzz" edges in routed cavities
- Length 1-1/2" (38.10mm), shank diameter 1/8" (3.18mm)
- Comes in sturdy protective case, with bit cutting diamater size clearly marked
