If you have any combination of a Rear Camera, Rear Parking Sensor, and/or Trailer Tow Assist but do not have a Blind Spot Sensor then you need the TRIPLE ROW REAR SENSOR 4-PIN MODULE (sold seperately on AMZ).

If y...

Buy Now From Amazon

If you have any combination of a Rear Camera, Rear Parking Sensor, and/or Trailer Tow Assist but do not have a Blind Spot Sensor then you need the TRIPLE ROW REAR SENSOR 4-PIN MODULE (sold seperately on AMZ).

If you plan on hardwiring the TRIPLE ROW (recommended) then you do not need the module. If you have a BLIS or Blind Spot Detection you must hardwire the tailgate directly to your tail lights


3X MORE STOPPING POWER

The Ultimate In Tailgate Lighting: Command attention with every signal
Bombard those behind you with a volley of 1,200 powerful LED's. Three complete rows of lights dedicated to maximizing your pickup's presence with an attractive and unique beam of light

Exclusive "1-2-3" Sequential Turn Signals
While other tailgate turn signals are just a standard "blink", the Triple Stack gives your truck a distinctive and sporty look with "1-2-3" SEQUENTIAL amber turn signals. The same style used by a certain American-made muscle car and only offered by Redline.

Go Ahead, Take It To The Lake

A lot of folks claim to be waterproof, but Redline actually is.

Using a rust-resistant aluminum body and an IP67 waterproof silicone, REDLINE is protected end to end
from any sand, dirt, dust, snow, or water

Can Handle a Minnesota Winter
It's not always sunny in Minnesota, but that's OK!
Redline is a built to last even at negative 20 Fahrenheit!

The best part...no drilling required!
Made to be as a simple and strong as possible.
Simply peel, prep, press onto your pickup and this add-on is as good as factory installed

Comes with a tough-as-nails adhesive enhancer that increases
hold strength over 5x. No need to drill, it ain't goin' anywhere

Plug 'N' Play Ready
Plugs directly into you trailer adapter for a quick install. (Reverse light may require wiring, instructions provided if needed

  • [COMPATIBILITY] 🚫 Not Compatible with 2022+ Chevy Silverado/GMC Sierra. 💡 2019-2021 Chevy Silverado/GMC Sierra 1500 and 2015-2023 F-150 require OPT7 Easy Connect Harness (sold separately). ⚠️ Truck with a trailer tow package or sensors (2015+ F150, RAM, 2015-2018 Silverado/Sierra) require OPT7 Hardwire Kit (sold separately). For mid-size pickup trucks (Tacoma, Chevy Colorado, GMC Canyon, Frontier, Ranger, Maverick etc.), please purchase 48" tailgate light bar.
  • [EASY INSTALLATION] Plug'N'Play for 2005–2014 F-150/F-250/F-350, Dodge RAM, Chevy Silverado/GMC Sierra 1500/2500/3500. 1. Peel the adhesive backing. 2. Stick the light bar firmly in place. 3. Plug the 4-pin connector into your 4-pin socket and connect the reverse wire. 💡 For 7-pin setups, use the OPT7 7-Pin to 4-Pin Adapter Harness with Reverse Wire (sold separately).
  • [VISIBILITY AT MAXIMUM] Sleek tailgate light bar enhances style and safety with brightness visible up to 30ft. Features 5 functions—running, turn, brake, reverse, and hazard—with sequential signals for max road presence.
  • [IP67 WATERPROOF] Waterproof body gives your truck that premium look and gets you seen. Mount with clips, 25 LB adhesive tape, or both. For seamless setup, use 5pc Easy Mount Neodymium Magnets—no screws or sticking needed!
  • [WARRANTY COVERED] Backed up with 1-year warranty starting from the order date. Need specific truck installation, contact our US Customer Support Team to assist.
  • [COMPATIBILITY] 🚫 Not Compatible with 2022+ Chevy Silverado/GMC Sierra. 💡 2019-2021 Chevy Silverado/GMC Sierra 1500 and 2015-2023 F-150 require OPT7 Easy Connect Harness (sold separately). ⚠️ Truck with a trailer tow package or sensors (2015+ F150, RAM, 2015-2018 Silverado/Sierra) require OPT7 Hardwire Kit (sold separately). For mid-size pickup trucks (Tacoma, Chevy Colorado, GMC Canyon, Frontier, Ranger, Maverick etc.), please purchase 48" tailgate light bar.
  • [EASY INSTALLATION] Plug'N'Play for 2005–2014 F-150/F-250/F-350, Dodge RAM, Chevy Silverado/GMC Sierra 1500/2500/3500. 1. Peel the adhesive backing. 2. Stick the light bar firmly in place. 3. Plug the 4-pin connector into your 4-pin socket and connect the reverse wire. 💡 For 7-pin setups, use the OPT7 7-Pin to 4-Pin Adapter Harness with Reverse Wire (sold separately).
  • [VISIBILITY AT MAXIMUM] Sleek tailgate light bar enhances style and safety with brightness visible up to 30ft. Features 5 functions—running, turn, brake, reverse, and hazard—with sequential signals for max road presence.
  • [IP67 WATERPROOF] Waterproof body gives your truck that premium look and gets you seen. Mount with clips, 25 LB adhesive tape, or both. For seamless setup, use 5pc Easy Mount Neodymium Magnets—no screws or sticking needed!
  • [WARRANTY COVERED] Backed up with 1-year warranty starting from the order date. Need specific truck installation, contact our US Customer Support Team to assist.

Similar Products

CURT 56584 Replacement Vehicle-Side Custom USCAR 5-Pin Trailer Wiring HarnessLEDGlow Truck Flat 4 Pin Y-Splitter Adapter Trailer Harness - Powers Both Tailgate LED Light Bars & Trailer LightsMICTUNING Universal 4 Way Flat Y-Splitter Plug and Play Adapter Extension Harness for LED Tailgate Light Bar and Trailer LightsDee Zee DZ43301 Truck Tailgate AssistOPT7 2pc 60LEDGlow 70OPT7 LED Rock Lights 4pc - RGBW Multicolor w/remote - Dimmer Strobe Fade IP67 Waterproof Pods for Off Road, Crawling, and Climbing - 2 Year WarrantyVIPMOTOZ Red OLED Neon Tube Pure White LED License Plate Light Tag Lamp Assembly Replacement For Ford F-150 F-250 F-350 Super Duty Ranger Pickup Truck Explorer Bronco Excursion Expedition