CMS Magnetics 112 LB Neodymium Cup Magnets w/Countersunk Hole & Matching Strikers and Screws Dia 1.57" - 2 Pack;

CMS Magnetics 112 Lb 1.57" Neodymium Cup Magnet Mounting Kit - 2 Pieces This high strength cup magnet is made of a neodymium magnet encased inside a chrome plated steel cup. This design greatly increases the holding power of the magnet as well as protects the magnet from shattering or damage from everyday use allowing it to last much longer than a plain magnet. This magnet holds up to 112 lbs when held against steel surfaces. The countersunk hole is meant for a #10 flat head screw to ensure a flush fit with the cup magnet. This magnet measures 1.57" in diameter and is .32" thick. Included in this mounting kit is are 2 MCHN-40 Neodymium cup magnets 2 matching stainless steel strikers that can be mounted anywhere due to its resistance to environmental conditions and 4 stainless steel non-magnetic screws that make installing both the cup magnets and the strike plates easier than ever. Because the magnetic field is focused in one direction these magnets cannot be attached to each other magnet to magnet. Neodymium cup magnets have a multitude of uses beyond sticking items to your fridge because of their immense strength and small size. Uses for this magnet range from magnetic fishing to storing tools and high capacity holding. Neodymium cup magnets aren't your typical neodymium magnet because of the way that they. As strong as neodymium magnets are they only use one side of their magnetic field to stick to metal which means they're only using half of their available strength. The addition of a steel cup however allows the other pole of the magnet to be used which increases the strength of the magnet to much higher than that of a normal neodymium magnet but also makes the other side magnetically weak. If the highest possible pull force is required then neodymium cup magnets are the answer to your magnet needs.