1.Hardware Only,Not including door panel; 2.Track had been pre-drilled 16" apart holes,if your wall is drywall+studs,pls check if it's 16" between two studs before you order the kit; 3.Track's two end had been pre-drilled holes for track connector to fix two tracks to be a longer one for double door system; 4.Track connector is a little bit shorter than track so it allow rollers slide one side to the other side; 5.The height from top of the door to the top of the roller is about 130mm,the gap bewteen door(thickness 40mm) and wall is 16mm
- Hardware Only, Not including door panel
- Basic information:-Material:Metal;-Surface:Brushed nickel;-Wall mount flat track can hold door panel MAX weight 270lbs;-Fit door panel width up to 48";-Fit door thickness:1 3/8"~1 3/4"
- Package including: Roller*2;Stopper*2;Sliding track*1;Track & wall connector*5; Anti-pad*2; Floor guide*1
- Technical detals:-Pre-drilled 16" apart holes on track,fit 16" apart studs wall;-The height from top of the door to the top of roller is 5 1/8",make sure there's enough space above door panel for installation;-The gap between door(thickness:1 5/8") and wall is about 1/2" for reference,wooden board/ add-on spacers required for thick baseboard/doorway trim
- Installation instruction:- Download the manual from Product guides and documents directly(the bottom of the description).Anything unclear during installation,you are welcome to send message to BD Hardware directly.
- Hardware Only, Not including door panel
- Basic information:-Material:Metal;-Surface:Brushed nickel;-Wall mount flat track can hold door panel MAX weight 270lbs;-Fit door panel width up to 48";-Fit door thickness:1 3/8"~1 3/4"
- Package including: Roller*2;Stopper*2;Sliding track*1;Track & wall connector*5; Anti-pad*2; Floor guide*1
- Technical detals:-Pre-drilled 16" apart holes on track,fit 16" apart studs wall;-The height from top of the door to the top of roller is 5 1/8",make sure there's enough space above door panel for installation;-The gap between door(thickness:1 5/8") and wall is about 1/2" for reference,wooden board/ add-on spacers required for thick baseboard/doorway trim
- Installation instruction:- Download the manual from Product guides and documents directly(the bottom of the description).Anything unclear during installation,you are welcome to send message to BD Hardware directly.