Parameters: Input voltage: DC 8V-60V Input current: 0-15A Output voltage: DC 10V-120V Output current: 0-15A Output ways : 1 Conversion efficiency: 85% Working frequency: 150KHz Short circuit protection: 20A fuse Operating temperature :﹣40℃~+85℃ Control method: numerical control + digital tube display Voltage regulator/display resolution: 100V/0.1V Minimum resolution of power display: 0.001W Current regulator/display resolution: 10A/ 0.1A Minimum resolution of capacity display: 0.001AH Output ripple: ≤50mV Weight: 243g Dimensions: 110×96×46mm  Features: 1. Adopts advanced microprocessor, can regulate output voltage and current accurately; 2. Has a fan to dissipate heat, can work stably for a long term; 3. Has memory saving function, can store 10 groups of parameters and they can be freely stored and called out; 4. All display by digitals, convenient and easy to use; 5. Has constant voltage and constant current statue; 6. Uses 4 digits high brightness LED, can display output voltage, current, power and capacity and other parameters; 7. Voltage, current, power, capacity and other parameters can be switched to display automatically or manually; 8. Has output OUT, constant voltage CV and constant current CC indicators; 9. Can be set whether to output automatically when power on; 10. The set voltage and current values can be saved by key. Package Includes: 1 X Numerical Control Boost Converter
- DC 8-60V to 10-120V 900W numerical control CC CV step up module with digital tube display, maximum current is 15A, with a fan to dissipate heat; Adopts advanced microprocessor, can regulate output voltage and current accurately, reliable and stable.
- The module has two kinds of modes: simple mode and fully functional mode(simple mode by default); Uses 4 digits high brightness LED, can display output voltage, current, power and capacity and other parameters; Has OUT, CC, CV indicators, easy and convenient to check the working statues.
- Simple mode: after setting the voltage and current values, pressing "OK" the module will output, then use the "↑" "↓" buttons to increase or decrease the value. At output statue, short press "ok" to switch between voltage and current display, long press for 3 seconds to turn on/off the function of displaying volt and amp in turns.
- Under fully functional mode, there are three special functions: 0. Output automatically when power on; 1. Save and call out the parameters, display power and capacity; 2. Take turns to show the parameters after output automatically. you can open them by yourself.
- Wide application, suitable for wind power, DC generator, solar panels to charge battery, you can also make a step-up power supply to power devices.
- DC 8-60V to 10-120V 900W numerical control CC CV step up module with digital tube display, maximum current is 15A, with a fan to dissipate heat; Adopts advanced microprocessor, can regulate output voltage and current accurately, reliable and stable.
- The module has two kinds of modes: simple mode and fully functional mode(simple mode by default); Uses 4 digits high brightness LED, can display output voltage, current, power and capacity and other parameters; Has OUT, CC, CV indicators, easy and convenient to check the working statues.
- Simple mode: after setting the voltage and current values, pressing "OK" the module will output, then use the "↑" "↓" buttons to increase or decrease the value. At output statue, short press "ok" to switch between voltage and current display, long press for 3 seconds to turn on/off the function of displaying volt and amp in turns.
- Under fully functional mode, there are three special functions: 0. Output automatically when power on; 1. Save and call out the parameters, display power and capacity; 2. Take turns to show the parameters after output automatically. you can open them by yourself.
- Wide application, suitable for wind power, DC generator, solar panels to charge battery, you can also make a step-up power supply to power devices.
