Remote Power for MicroUSB devices with up to 10 watts
Use this Splitter to power any USB device remotely
• Extend power to 328 ft with Cat-5e or CAT-6 cable
Features:
• compatible with 802.3af mode A or mode B or both, any polarity, 568A or 568B pinouts
• 802.3af to 5 volt 10 watt splitter with 1.35 x 3.5mm male dc plug
• includes microUSB straight connector 10 watt adapter from 1.35mm female
• includes 500 ma microUSB to iPhone adapter
• RJ45 female input power and data
• Rj45 male output data only - 10/100/1000 data rates
• supports all 802.3af modes
• used with PoE switches 802.3af or 802.3at or passive Injectors with 48 to 56volts
• Mix 5v and 12v and 802.3af on the same PoE switch or injector
• These devices use power from the ethernet cable. The splitter at the USB device lowers the voltage to 5 volts to operate the device.
• 250 ma from the 802.3af side produces 2 amps on the 5v side
Other Options
• If you do not already have a PoE switch, you can power up to 16 devices from one power source, use our 4, 8 or 12 or 16 port, 48v injector and select the number of splitters you need.
• See also the WS-POE-5v product for lower cost passive solutions
Related Products
• WS-POE-8-48v60w injector
• WS-POE-16-48v120w 16 port injector
• WT-AT-12v12w 12 volt splitter
• WT-AT-24v15w 24 volt splitter
