Vastar Desoldering Wick, solder braid with 2.5mm Width, 1.5m Length & Solder Sucker Desoldering Vacuum Pump Solder Removal Tool Blue;

Vastar desoldering wick is high quality desoldering braid with unique, no clean flux with a size of 0.10" (2.5mm) x 5'(1.5m), 0.4 oz. (11g).

Vastar Solder Sucker is a must have tool. This makes removing solder from capacitors, resistors, and other components easy.

How To Use:

1.Place the desoldering wick over the solder to be removed, then slightly push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed

2.Remove the desoldering wick after the solder has been absorbed.

3.Cut off the used section of the wick.

4.Repeat steps 1,2 and 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder. Sn63% and 60%(tin content) have good absorbability.

Package Included:

1 x Vastar Desoldering Wick

1 x Vastar Solder Sucker

Warranty:

45 days money-back & 18-month warranty. Any questions you have, please don't hesitate to contact us. We will get you back within 24hours.