This is 3mm/2.85mm filament. Please make sure your printer can support 2.85mm filament before buying this filament. This filament does not support 1.75mm 3D printers such as CR-10, FlashForge, Wanhao, MakerGear, Monoprice select and Prusa. This filament supports all 2.85mm open standard 3D printers such as Lulzbot and Ultimaker. Verify your printer before purchasing to avoid unnecessary returns.
eSUN 3D Printer Filament: PLA PRO 3mm
Size: 3mm nominal, 2.85mm +/-0.05mm actual
Extrusion Temperature Range: 210 to 225 Celsius
PLA PRO(PLA+) Advantages:
Superb layer bonding
High rigidity. Good glossiness.
Several times tougher than PLA
Smoother finished printouts.
No cracking or brittle problem.
PLA PRO prints about 20 Celsius higher than regular PLA and produces strong products.
- 2.85mm Filament. 1KG net (approximately 2.2 lbs) Filament with Black Spool, Blue, Pantone 7691C
- eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA.
- 2.85mm Actual Diameter (Dimensional Accuracy +/- 0.05mm). This is 3mm filament and actual diameter is 2.85mm +/- 0.05mm. This filament does not work with 1.75mm printers. Make sure your printer supports 2.85mm filament before purchasing to avoid unnecessary returns.
- Recommended Extrusion/Nozzle Temperature 210C - 225C, about 20 Celsius higher than regular PLA.
- Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"
- 2.85mm Filament. 1KG net (approximately 2.2 lbs) Filament with Black Spool, Blue, Pantone 7691C
- eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA.
- 2.85mm Actual Diameter (Dimensional Accuracy +/- 0.05mm). This is 3mm filament and actual diameter is 2.85mm +/- 0.05mm. This filament does not work with 1.75mm printers. Make sure your printer supports 2.85mm filament before purchasing to avoid unnecessary returns.
- Recommended Extrusion/Nozzle Temperature 210C - 225C, about 20 Celsius higher than regular PLA.
- Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5"
