Hot Racing 54 tooth hardened steel Modulus 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, and XO-1.FEATURES: - CNC machined hardened steel construction- Black oxide finished- Laser etched tooth cou...

Buy Now From Amazon

Hot Racing 54 tooth hardened steel Modulus 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, and XO-1.FEATURES: - CNC machined hardened steel construction- Black oxide finished- Laser etched tooth count markingYOU WILL RECEIVE: - One (1) 54 tooth, 1.0 modulus steel spur gearREQUIREMENTS: - Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh): - With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm buttonhead cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them. SPECIFICATIONS: - Overall diameter: 56.8mm- Gear face width: 8mmCOMMENTS: - Replaces Traxxas plastic 6449 or 6449X 54T spur gear

  • Made by Hot Racing; Hot Racing is a United States based company; parts are sourced from Chinese producers
  • All Hot Racing upgrade parts are direct replacements for stock components; additional parts are not required
  • Hot Racing part number SXMX54M01; UPC 083745976588
  • This item works with: Traxxas X-Maxx, XO-1
  • Made by Hot Racing; Hot Racing is a United States based company; parts are sourced from Chinese producers
  • All Hot Racing upgrade parts are direct replacements for stock components; additional parts are not required
  • Hot Racing part number SXMX54M01; UPC 083745976588
  • This item works with: Traxxas X-Maxx, XO-1

Similar Products

Traxxas 6491X 18-T Pinion Gear, 1.0 Metric Pitch, Fits 5Mm Shaft (Compatible with Steel Spur Gears) VehicleTraxxas 6449X 54-T Steel 1.0 Metric Pitch 20° Pressure Angle Spur GearTraxxas 2085X Waterproof Digital High Torque Servo with Metal Gears (Ball Bearing) Fits X-MaxxBlack Rubber Body Savers (6) for Traxxas X-Maxx XMAXXRaidenracing Harden Steel 18T Motor Gear for Traxxas X-Maxx XMAXX 6S 8STraxxas 6511 TQi Link Wireless ModuleRPM Oversized Rear Axle Carriers: X-Maxx, RPM81732Traxxas X-Maxx Sealed Bearing Kit