Led Strip Lights Waterproof 16.4ft 5m Flexible Color Changing RGB SMD 5050 150leds LED Strip Light Kit with 44 Keys IR Remote Controller and 12V Power Supply

Our solderless waterproof 10mm (SMD5050) RGB LED light strip connectors are a simple, frustration-free solution for waterproof 5050 RGB LED light strip connection and extension needs.

Installation Instructions:
1.Ensure your section of LED light strip is WATERPROOF SMD 5050 LED Strip and has 4 contacts (+, B, R, G) and all the contacts are clean.
2.When you cut your LED strip from the cutting line, please preserve the area of each copper contact on the LED strip to be bigger than the area of each corresponding pin in the connector. This is a very important step to ensure good conductivity between the connector and the LED strip.
3.Open the white clasp of the connector.
4.Peel off the 3M tape around the soldering/Cutting line area on the back of the LED strip, then insert the LED light strip into the clasp, with the 4 contacts of the led strip sitting ON the 4 pins of the clasp - make sure to match the + side of the strip to the + side of the clasp; (Note: There is no need to peel off the silicone on the surface of led strip around soldering line area.)
5.Close the clasp.
6.Your connection is successfully made!

Package includes: 10x 4-pin connectors for 10mm wide Waterproof RGB 5050 LED strip.

Waterproof-design Easy-Clasp Solderless Connectors, only work for 10mm wide WATERPROOF SMD 5050 RGB LED Strips that have 4 copper contacts at the cutting line.
These connectors are specially designed according to the structure of WATERPROOF RGB 5050 LED strip. So, these connectors CAN NOT work for NON-waterproof RGB 5050 LED strip.
No need to solder. Just clasp your prepared WATERPROOF LED strip section into the connector to get connected. But when installing, you need to carefully adjust the contact position to make sure the 4 pins in the connectors can totally penetrate the 4 copper contacts on the WATERPROOF LED strip to ensure good electrical conductivity.
Provide solderless, gapless and seamless connection for WATERPROOF SMD5050 RGB LED strips
10pcs connectors.
Waterproof-design Easy-Clasp Solderless Connectors, only work for 10mm wide WATERPROOF SMD 5050 RGB LED Strips that have 4 copper contacts at the cutting line.
These connectors are specially designed according to the structure of WATERPROOF RGB 5050 LED strip. So, these connectors CAN NOT work for NON-waterproof RGB 5050 LED strip.
No need to solder. Just clasp your prepared WATERPROOF LED strip section into the connector to get connected. But when installing, you need to carefully adjust the contact position to make sure the 4 pins in the connectors can totally penetrate the 4 copper contacts on the WATERPROOF LED strip to ensure good electrical conductivity.
Provide solderless, gapless and seamless connection for WATERPROOF SMD5050 RGB LED strips
10pcs connectors.

Top WaffleMaker Reviews

TronicsPros 4 Pin Solderless Waterproof LED Strip Connector - RGB Flex Ribbon Rope Tape Light Gapless Adapter for 10mm Wide Waterproof SMD 5050 RGB Flexible Strip Light (10pcs);