RSTH LCD Display with Digitizer Touch Screen Frame Assembly Replacement Screen for iPhone 6 plus 5.5" (White) ,with Instruction Card & Repair Tool Kit;

Compatible with : iPhone 6 Plus 5.5 inch LCD

*Please Be Note: We provide preassembled replacement for iPhone 6 Plus LCD Digitizer without home button earpiece,front camera flex and Metal Plate*

[Tools Package List]
1 x Rose Metal Screwdriver
2 x Plastic Opening Tool
2 x Triangular pry piece
1 x Suction Cup
1 x Cleaning Cloth
1 x Check card pin


[Instruction ]
If you are experiencing any installation issues, please follow any of these steps:
1. Please check the LCD to make sure the flex cable is in good condition and there is no debris on the connector.
2. Disconnect and reconnect the cable from the motherboard side.
3. Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again.
4. Make sure for iPhone 6 Plus IOS is upgraded to the latest version.
5. Leave the phone alone for a bit in a dry environment. Sometimes there is static after install that will go away after some time. Please leave phone alone overnight and see if this problem persists in the morning.
[Very Important]
It is highly suggested that all items must be tested before fully installing. Any item found to have been fully installed and broken during the installation process is not returnable or replaceable. Inspect the item closely before installing. We are recommend that if you have not repaired a wireless device in the past that you consult a professional before purchasing.