BSTPOWER 100W 2T Full Size (not Mini) Hot Glue Gun with Flexible Trigger High Temp Overheating Protection for DIY or craft, Melting Glue Gun with with Three Nozzles;

Automatic Thermostat
The ceramic PTC thermistor will help to keep the constant temperature when it heats up to the set temperature.

Adjustable Temperature
There's a dial that moves between 100°C-220°C for different use, the speed of the glue flow is different according to the different temperature, and you may need use a small flat-bladed screwdriver spinning on the dial to change the temperature.

Interchangeable Copper Nozzle
The diameter of the nozzle is about 13mm, orifice diameter is 3mm,length of whole nozzle is about 23mm and you can change to the longer one for different use.The copper nozzle has the better thermostability than the other nozzles.

LED Indicator
The convenient indicator light that lights up when the glue gun is heating up and cuts off as soon as it is heated up to the appropriate temperature

Specification
Frequency:50-60HZ
Weight:245g
Cable Length:140mm
Size:190*110mm

Package
1*Glue Gun
3pcs Interchangeable Nozzles

Tips

1 The nozzle and the glue liquid are hot when the gun is working, please don't touch it.
2 If the glue gun doesn't work for 15min, please cut off the power source to avoid the melting glue recirculating or damage.
3 It may has the light smoke the first use, it is normal and it will die off 10min later.
4 Please let the bracket stand to cool down the gun for several minutes after use, and don't change the other power cord with it.
5 If the strip is left after use, please don't pull it off,just let it in the gun for the next use.
6 It is normal for some glue flowing out after the few seconds you finish working because of the inertia pressure.
7 If the glue doesn't come out, you need adjust to the higher temperature or try another stick.

18-Month Warranty