Attributes:
- 3/8" Hex Drill Interface: No slip. Fits ALL drills.
- Adjustable Wire Guide: Gauge range from 0.12" to 1" (3mm - 25mm).
- Durable Blade: Made of special alloy that lasts much longer than high speed steel.
Features:
- Suitable for removing plastic and rubber insulation from undamaged scrap wire ;
- Convenient and quick blade change replacement: Just nee to push out the shaft and the blade will come off;
- Three Convenient Mounting Methods: Clamp on the bench corner; bolt down on the bench; held by the vice.
- Adjustable Wire Clamps: Prevent thin and soft wires from "escaping" the blade. Adjustable to clamp down wires with different sizes.
Close Cut Wire Guide:
Bringing smaller wire as close to the blade as possible for the best cut!
Operation:
1.Adjust the distance between blades and shaft in accordance with the cable size, to en sure the insulating layer stripped and the inner conductor undamaged.
2.Feeding: strip the cables through feeding hole. You can adjust the feeding hole to a proper position where wire can enter into but not swing.
3.Stripping: rotate the hand crank to start peeling.
Package Contents:
1 X wire stripping machine
1 X handle
4 X 8# screw
4 X screw nut
1 X 8# wrench
1 X 6# wrench
1 X 8*16 screw
5 X spacer
1 X drill parts
1 X feeding panel
