ONLY 3.2 USD PER UNIT
PACK OF 4 PAIRS OF VIDEO BALUN VT-T220PV(8 UNITS)
OVERVIEW
Power.Video (PV) signals are routed via UTP and RJ45
Use with Power Supply Hubs and Cable Integrators
Up to 3,000ft (1km) with a hub active receiver
Up to 1,500ft (460m) with a StubEQ hub
Supports up-the-coax type control signal up to 750ft (225m)
Exceptional interference rejection
Built-in transient protection
The VENTECH Model VT-T220PV Video Transceiver with Power is a
passive (non-amplified) device that allows the transmission of
real-time monochrome or color video over Unshielded Twisted-Pair
(UTP)telephone wire. Baseband (composite) signals of any type are
supported.
The VENTECH Model VT-T220PV video transceiver allows transmission of
CCTV video and low voltage power over UTP cable. The VT-T220PV
incorporates the transceiver engine of VENTECH 's popular VT-T220PV video
transceiver with the added value of camera power connections
Power and Video are routed via UTP and RJ45 connections.
Used at the camera, the passive VT-T220PV has a compact body, a
male BNC for direct connection to the camera, and is compatible with
CCTV product line.
The unparalleled interference rejection and low emissions of the
VT-T220PV allows video signals to co-exist in the same wire bundle as
telephone, datacom, or low-voltage power circuits. This allows the use
of a shared or existing cable plant. The VT-T220PV carnes a limited life
time warranty are UL and cUL listed and CE, WEEE and RoHS
compliant.
