Alightings RGBW LED Strip Connector for 5 Pin 10mm Non-Waterproof LED Strip Lights (Pack of 10);

These solderless 5 pin connectors are ideal for non-waterproof 10mm (SMD5050) RGBW LED trip, They are fully bendable and are perfect for extending your non-waterproof 5050 LED light strip across a gap, around an obstacle, or for making a bend.

Installation Instructions: 
1.Ensure your section of LED light strip has 5 contacts (+, B, R, G,W) and all the contacts all clean. 2.Open the white clasp of the connector.
3.Insert the tape light into the clasp, and with the 4 contact points of the led strip under the 5 prongs of the connector- make sure positive and negative poles match. (If you have a waterproof LED strip, should peel off silicon on the surface around soldering line area)
4.Close the clasp with the plier,gently pull the tape to confirm you've made a good connection.
5.Your connection is made! 
This product is used only to conductive connection, want to solid connection please to solder.

Technical Specifications :
Metal material: Copper/Surface treatment:tin
Plastic material:NyLon66 UL94V-0
Wire range: AWG#22#20
Applicability PCB board: thickness:0.2-0.4mm / width:10mm
Applicable specifications: 60/30leds per meter SMD5050 RGBW Non-Waterproof strip
Working voltage & current: DC12-24V,4A
Working temperature:-10℃~ +55℃

Package :
10 pcs LED Strip connector