Specification
Model: FSK 2.4GHz wireless remote control system
Transmission distance: 100m
Conmmunication channel: 16
Transmitter launch power: 0dB
Receiver sensitivity: -99dB
Connecting cable: 30cm straight cable
Transmitter stand-by time: over 1000hur (with 2pcs AAA alkaline battery)
Receiver stand-by time: Over 400hur (with 2pcs AAA alkaline battery)
Transmitter dimension (L*W*H): 97mm*33mm*15mm
Receiver dimension (L*W*H): 66mm*37.5mm*28.5mm
Transmitter Weight: 21.8g
Receiver Weight: 32.2g
Function
1. Oppilas is the wireless shuter remote control with single shooting, 1s continuous shooting, continuous shooting, Bulb shooting, and delaying shooting for camera.
2. Supports different shutter connecting cables for different brands and models of cameras respectively.
3. Adopts advanced drawing surface, fashionable looks.
4. Using FSK modulation to improve the reliability and stability of the products and 2.4GHz global free frequency.
5. Adopts AAA battery, easy and practical to purchase; the transmitter only 2mA in the working status while ignored during stand-by time, the receiver only 2mA in the working status, 2pcs AAA alkaline battery can working up to 400hours, it is 5 times longer than other similar products.
Included items:
Oppilas transmitter: 1pcs
Oppilas receiver: 1pcs
Shutter release cable: 1pcs
Instruction manual: 1pcs
Please note:
The batteries are not included in the package.
This product UC1 doesn't fit Olympus OM-D E-M1 MARK II and E-M10 MARK III .
- Dslr remote compatible with Olympus OM-D E-M1, E-M5 Mark II, E-M5, E-M10 Mark II, E-M10; PEN-F, E-PL8, E-PL7, E-PL6, E-PL5, E-PL3, E-PL2, E-P5, E-P3, EP-1, EP-2, E-PM2, E-PM1, E30, E100, E400, E410, E420, E450, E510, E520, E550, E600, E620, SP-510UZ, 550UZ, 560UZ, 565UZ, 570UZ, 590UZ, 810UZ, XZ-1, XZ-2, Stylus 1, SP-100EE, SH-60, SH-50, SH-1, SH-2, SZ-31MR, SZ-30MR, SZ-20, SZ-14, SZ-11, SZ-10, SH-21, SH-25 (NOT FOR Olympus OM-1, OM-5, E-M1X, E-M1 II, E-M1 III, E-M5 III — For these six cameras, please select our E3 model shutter remote control; NOT FOR E-M10 III, E-M10 IV)
- The wireless shutter release support various shooting modes: single shooting, continuous shooting, high speed continuous shooting, BULB (long exposure) and 4s delay shooting. 1s continuous shooting: set camera to single shot mode, set transmitter to continuous shot mode. HS continuous shooting: set camera to continuous shot mode, set transmitter to Bulb mode
- This camera shutter remote prevent shaking caused by holding camera and allows you to trigger your camera wirelessly up to 100 meters. FSK 2.4 GHz
- The wireless remote shutter release supports replacing connecting cable to fit different brands and models of cameras
- Important information: If the device doesn't flash signal lights when you receive it, please Replace 4pcs new batteries （notice: the batteries are not included in the package）
- Dslr remote compatible with Olympus OM-D E-M1, E-M5 Mark II, E-M5, E-M10 Mark II, E-M10; PEN-F, E-PL8, E-PL7, E-PL6, E-PL5, E-PL3, E-PL2, E-P5, E-P3, EP-1, EP-2, E-PM2, E-PM1, E30, E100, E400, E410, E420, E450, E510, E520, E550, E600, E620, SP-510UZ, 550UZ, 560UZ, 565UZ, 570UZ, 590UZ, 810UZ, XZ-1, XZ-2, Stylus 1, SP-100EE, SH-60, SH-50, SH-1, SH-2, SZ-31MR, SZ-30MR, SZ-20, SZ-14, SZ-11, SZ-10, SH-21, SH-25 (NOT FOR Olympus OM-1, OM-5, E-M1X, E-M1 II, E-M1 III, E-M5 III — For these six cameras, please select our E3 model shutter remote control; NOT FOR E-M10 III, E-M10 IV)
- The wireless shutter release support various shooting modes: single shooting, continuous shooting, high speed continuous shooting, BULB (long exposure) and 4s delay shooting. 1s continuous shooting: set camera to single shot mode, set transmitter to continuous shot mode. HS continuous shooting: set camera to continuous shot mode, set transmitter to Bulb mode
- This camera shutter remote prevent shaking caused by holding camera and allows you to trigger your camera wirelessly up to 100 meters. FSK 2.4 GHz
- The wireless remote shutter release supports replacing connecting cable to fit different brands and models of cameras
- Important information: If the device doesn't flash signal lights when you receive it, please Replace 4pcs new batteries （notice: the batteries are not included in the package）
