Yeeco Electronic SCR High Power Voltage Regulator Speed Governor Thermostats Dimmer Motor Controller Control Driver Board 10000W AC 220V with Cooling Fan;

Product Parameters:
Operating voltage: AC 220V
Maximum power: 10000W(connect resistive load)
Voltage adjustment: Between AC 0V and near the input voltage
Dimention: 111(Length)x77(Width)x37(Height)mm, not includ the switch handle
weight:0.25kg
Usage:
-Connect the SCR volt regulator to the front of the electronic's circuit
-Input & Output wire connect to the rotary potentiometer rotating rod respectively(Do not care which is zero line or firewire)
-Then, it can be use for dimming/ speed controlling/presure controlling/temperature controlling
Application:
Use new bidirectional ultra-high-power SCR(standard rate: 100A). Resistive load can be adjusted between 0 and input voltage, for use of appliances.
Such as: Electric furnace,Water heaters heat transfer,Lighting Dimmer,Large motor Speed Control and so on. Available for the big appliances whose power is less than 10000 watts, it is generally sufficient household appliances or small factories using.
Note:
Do not let the load exceed the maximum power. Pay more attention to the temperature rise when your first use of the regulator. You have to cool the regulator when temperature is so high(more than 80 degrees).
Starting current of inductive or capacitive loads is so high,it's 2-4 times higher than normal. So, reduce the power ,maybe less than half of the left margin when operating.
Ultra-high-power electronic voltage regulator, Suitable for lighting lanterns control engineering, electric wire, boiler heating control, electric motors and other control tools.
Do not use the motor with too-low voltage because SCR speed controller does not high accuracy. Little movement of the potentiometer can even get to 2.5V. Your load's voltage rate should be relatively comparing with the input voltage.

Package include:
1xSCR Electronic Voltage Regulator