THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES


    1967-2014 Ford Mustang
    2007-2014 Ford Edge
    2003-2004 Ford Mach 1
    1991-2011 Ford Crown Victoria
    1982-1990 Ford Bronco (Does not fit XLT Model)
Buy Now From Amazon

THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES


    1967-2014 Ford Mustang
    2007-2014 Ford Edge
    2003-2004 Ford Mach 1
    1991-2011 Ford Crown Victoria
    1982-1990 Ford Bronco (Does not fit XLT Model)
    1981-2011 Ford Ranger
    1991-2015 Ford Explorer



ADDITIONAL INFORMATION
  • Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
  • Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
  • Installation needs to be performed by a trained professional


It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
  1. Your lugs studs will need to be shortened by grinding them down
  2. You can replace your studs will shorter studs
  3. if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)


ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS



  • Vehicle Bolt Pattern: 5x4.5
  • Wheel Bolt Pattern: 5x4.5
  • Hub Bore: 82.5mm
  • Thread Pitch: 1/2x20
  • Thickness: Each Spacer Measures 2" Thick
  • Vehicle Bolt Pattern: 5x4.5
  • Wheel Bolt Pattern: 5x4.5
  • Hub Bore: 82.5mm
  • Thread Pitch: 1/2x20
  • Thickness: Each Spacer Measures 2" Thick

Similar Products

Tinted Housing Dual Row LED 3rd Tail Brake Light Cargo Lamp for Ford F250 F350 Super Duty 99-16 / Mazda B-Series 94-10Supreme Suspensions - 2 Inch Front Lift + Rear Add-A-Leaf Pack for 1983-1996 Ford Ranger [2WD] Silver Billet Aluminum Spacers and Carbon Steel Short Leafs [Includes 3/4American Automotive 1998-2010 Ranger Lift Kit 3