~ For chips, cracks, pits, gouges, reattaching or rebuilding lost stone pieces, or for the ultimate counter top installation adhesive, you need II 29. When dry II 29 is an impenetrable solid shield that is an unbreakable bon...

Buy Now From Amazon

~ For chips, cracks, pits, gouges, reattaching or rebuilding lost stone pieces, or for the ultimate counter top installation adhesive, you need II 29. When dry II 29 is an impenetrable solid shield that is an unbreakable bond. Even our own UV cure repair kits do not compare to the durability of II 29. II 29 is completely non-toxic, food-safe and simple to use. For years I.I. 29 has been the #1 install and rapid-repair epoxy used by the pro's. The extended 15 minute application time allows for proper alignment and application for repairing or installing without needing to rush...then instantly dries after the application time is up. So you don't wait for projects to dry. I.I. 29 strongly bonds to most all projects all around the house... not just stone and tile. See our EZ-TINT pigments for tinting instructions //// REBUILDING MISSING CHIPS: After tinting, fill the epoxy into the repair area. Shape into place. Let dry. Razor off the excess and continue shaping with safety razor. //// CHIPPED STONE: No tint needed if you have a clean break where the piece can be reattached tightly. Apply epoxy to one side and push firmly into place. Always clamp for the most invisible of seams or tape tightly down with duct tape. //// CRACKS: Cracks must be wide as a credit card for the epoxy to be able to fill the crack. After tinting the epoxy, fill crack to the surface. Allow to self level for a glossy finish or once excess is dried, razor the surface level for a matted, travertine type finish. Remains flexible for hours if you decide to dig out attempt until you get exactly the finished look you desire. /////// COUNTER TOP INSTALLATION: Joint lines do not need to be taped since amazingly, the dried excess will not stick to the slick finished surfaces. Simply mix equal amounts of Resin and Hardener and apply to one or both edges. Clamp for maximum bond. Do not remove uncured excess epoxy. Let dry then simply razor off the excess in apx. 30 minutes once excess is dry-to-touch.

  • Any & All Countertops - Ceramic, corian, formica, granite, marble, porcelain, quartz, quartzite, silestone, slate, soapstone, tile, travertine, wood.
  • Easily Tintable - Seamlessly match stone colors with EZ-Tint pigments. Tinting is required if dried epoxy is visible.
  • No Waiting - Dry in 29 minutes, mess free, no sanding necessary, taping off repair area not required, & will not stick to polished surfaces.
  • Super Strong, Unbreakable Bond - For installing slabs or reattaching stones. Sand or drill smooth, slick surfaces on non-porous stones like marble.
  • Sustainable Color - Tinted repairs will not exhibit yellowing ordiscoloration over time. Extra tint may be needed if using white tint to preserve color.
  • Any & All Countertops - Ceramic, corian, formica, granite, marble, porcelain, quartz, quartzite, silestone, slate, soapstone, tile, travertine, wood.
  • Easily Tintable - Seamlessly match stone colors with EZ-Tint pigments. Tinting is required if dried epoxy is visible.
  • No Waiting - Dry in 29 minutes, mess free, no sanding necessary, taping off repair area not required, & will not stick to polished surfaces.
  • Super Strong, Unbreakable Bond - For installing slabs or reattaching stones. Sand or drill smooth, slick surfaces on non-porous stones like marble.
  • Sustainable Color - Tinted repairs will not exhibit yellowing ordiscoloration over time. Extra tint may be needed if using white tint to preserve color.

Similar Products

EZ-Tint 4 Pack. Black Brown White Gray for tinting Epoxy and PolyestersSystem Three 3201A04 Black Paste Pigment Coating, 2 oz. BottleDAMO 4-1/28PC LamLock Universal Color Kit - 1/12 Ounce Each - Epoxy Color Pigment Set - Polyester Color Pigment - Acrylic Color Pigment KitSystem Three 3200A04 White Paste Pigment Coating, 2 oz. BottleTenax 10 Piece Universal Coloring KitBlack Epoxy Pigment (Colorant, Dye, Tint) 6cc (0.2 oz.)IMT Seam Setter with 4.9