Comenzar Flickering Flameless Candles with Glass Effect Battery Operated Candles with Remote Control Cycling Timer 24 Hours Pack of 2 (H 6" x D 2.2") LED Candles Pillar Candles(White);

How to inserting the batteries
1.Open the battery compartment cover by pushing the latch back and removing the cover completely.

2.Insert 3 x AAA batteries into the battery compartment according to the polarity indicators inside the compartment.

3.Close the battery compartment cover by placing the 2 small tabs in the slots and pressing down to secure the latch.

How to illuminating the Candle

Move the OFF-ON switch on the bottom to ON. The candle will illuminate until you manually move the switch to OFF.

ON-OFF button:Illuminating the Candle On=Off(Note:Before you use the Remote Control, switch the ON-OFF button to ON at the buttom of the LED candles)

TIMER:set On/Off Automatic Time feature, set to 2Hours/4Hours/6Hours/8Hours

*For example, s et 2H at 19:00, it will automatically shutdown at 21:00. Will be automatically open at 19:00 next day, at 21:00 then automatically shut down. It will cycle every 24 hours.

Mode:Candle-Non-Moving Flame;Light-Moving Flame

Brightness Control: Left button to lower the brightness Right button to increase brightness.

More tips:

Pull out the palstic sheet before use. If the flame doesn't move after yor press "light" button, press + to increase brightness to maximum. If the battery of the Remote Control runs out, you may pull out the battery tray then replace a new button cell battery.