3/16" Caning Chisel

This is reed spline, used to hold cane webbing in the groove on cane chairs. Please use the chart to determine the size you need. The spline comes in 6 foot long pieces, so a quantity of 1 will get you one 6' long piece of the size you choose. A quantity of 2 will get you 12', a quantity of 3 will get you 18', a quantity of 4 will get you 24' and so on. Please make sure to choose the correct quantity and size you need. If your chair has holes drilled in the seat frame, you do not need spline.

This is reed spline, used to hold cane webbing in the groove on cane chairs.
This is NOT for chairs that have holes drilled in the seat frame.
Sold in 6 foot lenghts, a quantity of one gets you a piece 6 feet long, a quantity of 2 gets you 2 pieces each 6 feet long.
Measure the width of your cleaned out groove to determine the size spline you need.
Groove width 1/8" sz 6.5, 5/32" sz 7, 11/64" sz 7.5, 3/16" sz 8, 13/64" sz 8.5, 7/32" sz 9, 1/4" sz 9.5, 9/32" sz 10
This is reed spline, used to hold cane webbing in the groove on cane chairs.
This is NOT for chairs that have holes drilled in the seat frame.
Sold in 6 foot lenghts, a quantity of one gets you a piece 6 feet long, a quantity of 2 gets you 2 pieces each 6 feet long.
Measure the width of your cleaned out groove to determine the size spline you need.
Groove width 1/8" sz 6.5, 5/32" sz 7, 11/64" sz 7.5, 3/16" sz 8, 13/64" sz 8.5, 7/32" sz 9, 1/4" sz 9.5, 9/32" sz 10

Top WaffleMaker Reviews

Spline for Cane Chairs, Any Size #6.5 to #10, Price is per 6' Length (9.5);