J.W. Winco 5LXF1/B DIN71802 Ball Joint, 8 mm Diameter, M5 x 0.8 Tapped Left Hand Thread, M5 x 0.8 Threaded Shank, 10 mm Thread Length with Safety Catch;
J.W. Winco 5LXF1/B DIN71802 Ball Joint, 8 mm Diameter, M5 x 0.8 Tapped Left Hand Thread, M5 x 0.8 Threaded Shank, 10 mm Thread Length with Safety Catch

DIN 71802 steel angled ball joints consist of a ball socket DIN 71805 and a ball shank DIN 71803. The angle of rotation for the safety catch versions is 15°, and for the versions without safety catch is 18°. For assemb...

Buy Now From Amazon

DIN 71802 steel angled ball joints consist of a ball socket DIN 71805 and a ball shank DIN 71803. The angle of rotation for the safety catch versions is 15°, and for the versions without safety catch is 18°. For assembly, the ball is pushed through the circlip which acts as a retainer. Should the retaining force between the ball and socket not be sufficient (see table), it can be increased by adding a safety catch, which can easily be installed. To protect the ball point, a dust seal can be added.

  • 8 mm Ball Joint Diameter
  • M5 x .8 Tapped Left Hand Thread
  • M5 x .8 Threaded Shank, 10mm Thread Length, with Safety Catch
  • Housing and Threaded Shank: Steel, Zinc - Plated, Blue Passivated Finish
  • Ball: Hardened, Ball Socket: Lubricated, Hex Nut: Metric, ISO 4032, Steel, Zinc-Plated, Blue Passivated Finish; Included as Standard Part of Assembly
  • 8 mm Ball Joint Diameter
  • M5 x .8 Tapped Left Hand Thread
  • M5 x .8 Threaded Shank, 10mm Thread Length, with Safety Catch
  • Housing and Threaded Shank: Steel, Zinc - Plated, Blue Passivated Finish
  • Ball: Hardened, Ball Socket: Lubricated, Hex Nut: Metric, ISO 4032, Steel, Zinc-Plated, Blue Passivated Finish; Included as Standard Part of Assembly