TotalBoat JD Select is a single-season, water-based ablative antifouling bottom paint that's easy to apply, low in VOCs, environmentally friendly, and cleans up easily with soap and water. This paint may be applied by brush, roller, or spray equipment over existing paints that are in good condition. Spraying is not ideal, but if spraying, thin JD Select with water up to a maximum of 5%, and use a wide nozzle tip. Burnish JD Select for a smoother, more fuel-efficient finish.
Choose from six popular colors (Black, Blue, Green, Red, Shark White, and Teal) in quart and gallon sizes. With the right prep work and sufficient layers of paint, your boat's hull will still look amazing when it's pulled out of the water at season's end. This 1-part marine finish has excellent coverage so you get the most out of your paint. This product is intended for antifouling use on boats, below the waterline only. It is not intended for household use. Compare to Interlux Micron Optima, Interlux Aqua, SeaHawk Monterey, and Pettit Hydrocoat. All TotalBoat marine products are developed by boaters for boaters, to provide great value and great results.
Gallon orders receive a free roller & metal tray kit, abrasive pad, 1 roll painter's masking tape, paint suit, pair of latex gloves, and two 10" wooden stir sticks. Quart orders receive a pair of latex gloves, an abrasive pad, and 2 10" stir sticks free of charge!
- Excellent single-season antifouling protection for fiberglass and wooden boats in salt and fresh water.
- Apply by brush, roller, or spray over existing ablative or hard bottom paints. Burnish for increased speed and fuel efficiency.
- Boats can be launched up to 18 months after application. Water-activated ablative formula deactivates on dry land and reactivates when launched.
- Low-VOC, water-based marine paint is easy to apply and cleans up with soap and water. Coverage is approximately 400 sq. ft. per gallon.
- Gallon orders include free roller & metal tray kit, abrasive pad, 1 roll painter's tape, paint suit, pair of latex gloves, & two 10" wooden stir sticks. Quart orders receive a pair of latex gloves, an abrasive pad, & 2 10" stir sticks free of charge!
- Excellent single-season antifouling protection for fiberglass and wooden boats in salt and fresh water.
- Apply by brush, roller, or spray over existing ablative or hard bottom paints. Burnish for increased speed and fuel efficiency.
- Boats can be launched up to 18 months after application. Water-activated ablative formula deactivates on dry land and reactivates when launched.
- Low-VOC, water-based marine paint is easy to apply and cleans up with soap and water. Coverage is approximately 400 sq. ft. per gallon.
- Gallon orders include free roller & metal tray kit, abrasive pad, 1 roll painter's tape, paint suit, pair of latex gloves, & two 10" wooden stir sticks. Quart orders receive a pair of latex gloves, an abrasive pad, & 2 10" stir sticks free of charge!
