THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES
2006-2010 Jeep Commander
2007-2015 Jeep Wrangler
1999-2010 Jeep Grand Cherokee
ADDITIONAL INFORMATION
- Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
- Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
- Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options: - Your lugs studs will need to be shortened by grinding them down
- You can replace your studs will shorter studs
- if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS
- IF YOU ARE PURCHASING FROM ANYONE OTHER THAN TITAN WHEEL ACCESSORIES YOU ARE PURCHASING A LESSER QUALITY PRODUCT PRODUCT.
- 4x Brand NEW Wheel Adapters Vehicle Bolt Pattern 5x5 Wheel Bolt Pattern 5x5 Hub Bore 71.5mm Thickness: 2 inch (each spacer) Thread Pitch: 1/2" x 20
- T6 6061 Billet Wheel Adapters 12.9 Grade Steel Threads
- Mainly used to give your vehicle an agressive stance, and will help with any clearance issues (if present)
- CNC Machined Usings Aerospace Aluminum
- IF YOU ARE PURCHASING FROM ANYONE OTHER THAN TITAN WHEEL ACCESSORIES YOU ARE PURCHASING A LESSER QUALITY PRODUCT PRODUCT.
- 4x Brand NEW Wheel Adapters Vehicle Bolt Pattern 5x5 Wheel Bolt Pattern 5x5 Hub Bore 71.5mm Thickness: 2 inch (each spacer) Thread Pitch: 1/2" x 20
- T6 6061 Billet Wheel Adapters 12.9 Grade Steel Threads
- Mainly used to give your vehicle an agressive stance, and will help with any clearance issues (if present)
- CNC Machined Usings Aerospace Aluminum
