4-pack GX23 to E27 adapter,GX23 to E26/E27 Lamp base converter, Rohs
4pcs/lot Free Shipping
Rohs Compliant
Rated Working: 100-250V AC 2A
Suit for: GX23 socket, install E26 E27 LAMP
Flame Retardant PBT, Phosphor Bronze
Used for replace standard screw-based lamp into a pin-based socket
This lamp base converter don't change any voltage or current. If there is a ballast connected, dismantle ballast before install the LED light, otherwise the ballast will make resonance high voltage which destroy the light.
Note: It is 100% that PL-C downlight fixture has ballast inside.
Every piece are tested before ship. No chance screw out or defective. 100% guarantee work if you know how to install it! we will not be responsible if the adapter or your lamp get burnt!
Please do not purchase if you do not know how to rewire or remove the Ballasts!!
- 4pcs/lot, GX23 Lamp base to E27 light sockets/holder adapter Not for G23, G24d, GX24d which are also 2P. BUT GX23 is Double Tab.2P in Parallel
- Works with LED / Halogen / CFL light bulb lamps. Works for 2-Pin CFL with GX23 Base: 13w Single Tube; and GX23-2 Base:13w Quad Tube
- Flame Retardant PBT, Phosphor Bronze.100-250V workable,Physically change the contact and socket, DON'T Change any voltage
- All pin-based CFL, like GX24Q G24 GX23 G23 are lamp-ballast separated, but all screw-in E26 E27 are lamp-ballast integrated. ballast is a must to start a high voltage(600V-1500V 1ms) to light up the CFL, but it is dangerous for LED Lamp. Because LED Lamp are built with LEDs and Driver which is transforming the 100-240V AC to DC for LEDs. So the LED Driver input should be 100V-240V or 85-265V, so 600-1500V will be too high, and easily destroy the l
- 4pcs/lot, GX23 Lamp base to E27 light sockets/holder adapter Not for G23, G24d, GX24d which are also 2P. BUT GX23 is Double Tab.2P in Parallel
- Works with LED / Halogen / CFL light bulb lamps. Works for 2-Pin CFL with GX23 Base: 13w Single Tube; and GX23-2 Base:13w Quad Tube
- Flame Retardant PBT, Phosphor Bronze.100-250V workable,Physically change the contact and socket, DON'T Change any voltage
- All pin-based CFL, like GX24Q G24 GX23 G23 are lamp-ballast separated, but all screw-in E26 E27 are lamp-ballast integrated. ballast is a must to start a high voltage(600V-1500V 1ms) to light up the CFL, but it is dangerous for LED Lamp. Because LED Lamp are built with LEDs and Driver which is transforming the 100-240V AC to DC for LEDs. So the LED Driver input should be 100V-240V or 85-265V, so 600-1500V will be too high, and easily destroy the l
