THESE SPACERS WILL BOLT UP TO THE FOLLOWING VEHICLES (ADAPTERS DO CHANGE THE BOLT PATTERN)
- 1967-1973 Ford Mustang
1994-2014 Ford Mustang
2007-2011 Ford Edge
2003-2004 Ford Mach 1
1991-2007 Ford Crown Victoria
1982-1990 Ford Bronco (Does not fit XLT Model)
1981-2011 Ford Ranger
1991-2010 Ford Explorer
1984-1992 Lincoln Mark 7
1982-2004 Lincoln Town Car
2003-2010 Lincoln Aviator
1996-2010 Mercury Mountaineer
1991-1994 Mazda Navajo
1998-2001 Mazda B2500
1994-2007 Mazda B3000
1994-2009 Mazda B4000
ADDITIONAL INFORMATION
- Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lugs WILL BE required
- Make sure that all adapters get a FULL 6-8 Turns of the Lugs when Tightening, Failure to do so, can result in damage to your vehicle
- Installation needs to be performed by a trained professional
It's Possible that you OEM Studs are longer than the spacer is thick, if so you have a few options:
- Your lugs studs will need to be shortened by grinding them down
- You can replace your studs will shorter studs
- if you wheels have cavities in the backside, between the mounting holes, then you should be OK (will need to make sure flush)
ALWAYS ENSURE THAT THERE IS NO GAP BETWEEN THE SPACERS AND THE HUB OF THE WHEELS
