DETAILS This 16 gallon per minute hydraulic pump is a must have for any log splitter application. Fits a wide range of applications, most commonly used on log splitters with a rated force less than 35 TON. This 2 stage gear pump allows for maximum speed without a loss of pressure. Pump is preset to gear down at 500 psi. This replacement pump fits a wide variety of log splitters and outdoor power equipment. Pumps work in horizontal and vertical positions. Log Splitter Pump Spec Sheet 11-28GPM Spec Sheet: GPM: 16 Shaft Diameter: 1/2in. Inlet: 1in. Outlet: 1/2in. NPT Dimensions: 9in. x 6.5in. x 4in. Minimum engine size: 8HP 1st Stage: 16 GPM@650 PSI 2nd Stage: 3.5 GPM@2500 PSI Maximum Pressure: 3000 PSI Bolt Circle: 2.85in. 4 Bolt Holes Spaced 2in. on Center Bolt Hole Diameter: .345in. Rotation: Clockwise Hydraulic Fluid Type: AW-32 10-Weight (ISO 32) or AW-46 20-Weight (ISO 46) ***Not designed for use with "universal" or "tractor" hydraulic fluid*** Note: Suction-side filtration should be no finer than 150 micron.
Make sure hydraulic fluid reservoir is not below pump to ensure a sufficient flow of oil to the pump.
