Features: Extreme performance DDR4 memory designed for gaming and PC enthusiasts Optimized compatibility with DDR4-compatible Intel Core platforms Sleek and stylish aluminum heat spreader design 1.35V ultra low voltage Intel XMP 2.0 support Capacity 16GB (2 x 8GB), Type 288-Pin DDR4 SDRAM, Speed DDR4 3200 (PC4 25600), Cas Latency 16, Timing 16-18-18-38, Voltage 1.35V, ECC No, Buffered/Registered Unbuffered, Multi-channel Kit Dual Channel Kit, Chipset Intel Z170 Platform, Color Red, Heat Spreader Yes, Recommend Use High Performance or Gaming Memory
- G.SKILL RipjawsV Series DDR4 U-DIMM Memory Kit, Model: F4-3200C16D-16GVRB
- 16GB total capacity kit containing 2x8GB modules, rated for up to DDR4-3200 CL16-18-18-38 at 1.35V
- Non-ECC, DDR4 U-DIMM, 288-pin, for Desktop PC & Gaming
- Includes JEDEC default profile, and Intel XMP memory overclock profile
- Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
- Refer to G.SKILL memory QVL or RAM Configurator tool on the G.SKILL website for more details on validated motherboard and hardware.
- Usage in any manner inconsistent with manufacturer specifications, warnings, designs, or recommendations will result in lower speeds, system instability, or damage to the system or its components.
- Memory kits will boot at JEDEC default SPD speed at default BIOS settings with compatible hardware.
- For memory kits with XMP overclock profile, enable XMP/DOCP/A-XMP profile in BIOS to reach up to the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Enabling XMP is an act of overclocking and requires BIOS setting adjustments.
- Reaching the rated XMP overclock speed and system stability will depend on the compatibility and capability of the motherboard and CPU used.
- G.SKILL RipjawsV Series DDR4 U-DIMM Memory Kit, Model: F4-3200C16D-16GVRB
- 16GB total capacity kit containing 2x8GB modules, rated for up to DDR4-3200 CL16-18-18-38 at 1.35V
- Non-ECC, DDR4 U-DIMM, 288-pin, for Desktop PC & Gaming
- Includes JEDEC default profile, and Intel XMP memory overclock profile
- Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
- Refer to G.SKILL memory QVL or RAM Configurator tool on the G.SKILL website for more details on validated motherboard and hardware.
- Usage in any manner inconsistent with manufacturer specifications, warnings, designs, or recommendations will result in lower speeds, system instability, or damage to the system or its components.
- Memory kits will boot at JEDEC default SPD speed at default BIOS settings with compatible hardware.
- For memory kits with XMP overclock profile, enable XMP/DOCP/A-XMP profile in BIOS to reach up to the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Enabling XMP is an act of overclocking and requires BIOS setting adjustments.
- Reaching the rated XMP overclock speed and system stability will depend on the compatibility and capability of the motherboard and CPU used.
