The Heat Powered Stove Fan N429 fits almost all freestanding stoves. No electricity required,just place it on the top of stove,with a surface temp between 50-350°C (122-662°F),the fan will create its own electricity with the heat and circulate warm air 220CFM (cubic feet per minute) throughout the whole room with 17% fuel cost saving.
Features:
1) Circulates warm air throughout the room
2) Self-powered by heat,speed automatic controlled by temp of stove top
3) Don't need electricity,no running cost
4) Compact design,height only 189mm
5) Start to work at temperature 50°C(122°F)
6) Safe,its inbuilt protection system to stop them overheat
7) Maximizes efficiency of stove
8) Silent operation,no noise,ready to use out of box
9) Eco-friendly,reduce emissions of stoves
Specifications:
- Material: Anodized Aluminum
- Product Dimension: Height189mm,Width180mm
- N.W.: 0.5kg
- Color Box Size: 17cm x 11cm x 20cm
- Starting Temperature:50oC(122oF)
- Maximum operating temperature 350°C(662°F)
- Optimum operating range:80-250°C(176-482°F)
- Air Flow:220CFM
- Starting Up Time(200°C):28-50 Sec
- Running RPM:900RPM
- Silent operation,the noise less than 25dB
- Warranty:12 months
- Certificate:CE
- Magnetic Stove Thermometer:Diameter 63mm,monitor temp from 100-800°F(40-425°C).(+/- 10%),placed on the stove top or side,or single wall pipe
What to Do If Noise
If there is noise caused by the spinning fan,please check the fan blade,normally it because the blade is a little bent,rotate the blade with your finger,find the bent part,fix it to the right position by hand,no tool needed.Sometimes it may happened after shipping.As the blade is aluminum,not iron or other hard materials,so it's also very easy to be fixed.
- ✅ [ Must-Have Fireplace Accessories ] - Premium anodized aluminum heat-powered wood stove fan N429 makes your room warm faster + Magnetic thermometer monitors stove temperature to avoid over-heat.
- ✅[ Compact Design ] - Height only being 19 cm / 7.48'' to fit narrow spaces, ideal for all kinds of wood burning stoves, gas stoves, pellet stoves, etc.
- ✅[ No Running Cost ] - Self-starts at temp as low as 50°C / 122°F, no batteries or electricity required. Ideal operation temp is around 482°F/250°C, if the max temp on your stove top is even below 212°F/100°C, our stove fan is NOT recommended for you.
- ✅ [ Powerful & Silent ] - Warm air is quietly pushed into the room rather than simply rises up to the ceiling or being trapped around the stove. This improves the stove efficiency and maximizes heat distribution throughout the room.
- ✅ [ 2-Years Warranty ] - The frequently asked questions can be found on the USER GUIDE, if any other questions or complaints during usage, please contact us directly for solutions. GalaFire is always here for help.
- ✅ [ Must-Have Fireplace Accessories ] - Premium anodized aluminum heat-powered wood stove fan N429 makes your room warm faster + Magnetic thermometer monitors stove temperature to avoid over-heat.
- ✅[ Compact Design ] - Height only being 19 cm / 7.48'' to fit narrow spaces, ideal for all kinds of wood burning stoves, gas stoves, pellet stoves, etc.
- ✅[ No Running Cost ] - Self-starts at temp as low as 50°C / 122°F, no batteries or electricity required. Ideal operation temp is around 482°F/250°C, if the max temp on your stove top is even below 212°F/100°C, our stove fan is NOT recommended for you.
- ✅ [ Powerful & Silent ] - Warm air is quietly pushed into the room rather than simply rises up to the ceiling or being trapped around the stove. This improves the stove efficiency and maximizes heat distribution throughout the room.
- ✅ [ 2-Years Warranty ] - The frequently asked questions can be found on the USER GUIDE, if any other questions or complaints during usage, please contact us directly for solutions. GalaFire is always here for help.
![GALAFIRE [ 2 Years ] Eco Heat Powered Wood Stove Fan for Gas/Pellet/Log/Wood Buring Stoves, Fireplace Fan 4 Blade Black + Stove Thermometer](https://m.media-amazon.com/images/I/41FI1mmJGxL._SL75_.jpg)
