How to Use:
Step 1: Lay out the perimeter of the walkway and drive wooden stakes into the ground at each corner.
Step 2: For professional results, remove one inch of sod. Save the sod you remove and use it to fill in gaps once the walkway has set.If you plan to use the sod later, set it aside in a cool place and water.
Step 3: The mold comes with directions on how much concrete you need based on the length of walkway you'sre creating. Mix the concrete, adding color to make the walkway resemble cobblestone or brick.
Step 4: Wet the mold with water before you begin adding concrete.
Step 5: Beginning in one corner of the walkway, lay the mold in place.
Step 6: With a bucket or trowel, fill each cavity of the mold with concrete. The concrete should be level with the top of the mold.
The thick level of concrete can be varying depends on your requirement of garden stepping stones. A wetter mix of concrete for concrete golden molds is used to get garden stepping stones with ground / lower level, and a stiffer mix of concrete is used to get garden stepping stones with higher / stone level.
Concrete golden molds work well in all situations and create a very well garden stepping stones.
